22-06-2014, 05:44 PM
So this is long overdue an update, basically I rebuilt the engine, fitted it up and went in for the MOT just the day before leaving for Germany. On the ramp, we noticed an oil leak so I checked the level when I got back. Oil consumption was calculated at about 1 litre to 12 miles :/ So we took Fooby's GTi instead
The reason for the leak was that I'd failed at installing the rubber seals for the main bearing cap that makes up the block by the flywheel. Having now sorted that, I've got it all back together and holding oil! Roll on Pugfest
And a few pictures taken today because it's sunny
[attachment=17015]
[attachment=17016]
[attachment=17017]
The reason for the leak was that I'd failed at installing the rubber seals for the main bearing cap that makes up the block by the flywheel. Having now sorted that, I've got it all back together and holding oil! Roll on Pugfest
And a few pictures taken today because it's sunny
[attachment=17015]
[attachment=17016]
[attachment=17017]
Welding and fabrication projects undertaken, contact me for more information.