Londondan's Black Supercharged XUD New Video Inside!! :D
|
Londondan's Black Supercharged XUD New Video Inside!! :D
|
17-08-2013, 08:52 PM
what will be the power out put of this? thinking back to when i 1st stepped into the 306 from metros in 2005, a stage 1 was just say the done thing, supercharging a DT wasn't even heard of! how times of changed for the 306 DT!
17-08-2013, 09:35 PM
Ha ha I bet you had a huge grin on your face when it started for the first time..then realising you'd be ringing the nuts off the rev counter very soon
![[Image: siggy1.jpg]](http://i653.photobucket.com/albums/uu252/crissy_boy/Cars/siggy1.jpg) the smokey old bus that sounds like a tractor... 
17-08-2013, 11:17 PM
(17-08-2013, 08:52 PM)procta Wrote: what will be the power out put of this? thinking back to when i 1st stepped into the 306 from metros in 2005, a stage 1 was just say the done thing, supercharging a DT wasn't even heard of! how times of changed for the 306 DT! Too early to tell power wise yet, have to wait wont be reaching full potential yet until I have a few supporting mods in the block!! I know what you mean about changing times, I remember when the theoretical max of a dt was around 130bhp, now we have td04's gt2056's, etc! (17-08-2013, 09:35 PM)devils_fuel Wrote: Ha ha I bet you had a huge grin on your face when it started for the first time..then realising you'd be ringing the nuts off the rev counter very soonlol! Too right! I wont be revving the tits off it but I'm not sure if the standard rev counter will show enough revs!!!! 
Noise was epic from this!!! Definitely woke the neighours
Posts: 19,854
Threads: 581 Joined: Dec 2011 Reputation: 195 Location: Bournemouth Car Model/Spec: Supercharged 306 GTi6 
Thanks: 36
Given 82 thank(s) in 78 post(s)
18-08-2013, 06:27 PM
Glad to see this is back in use and still on this forum rather than the charger sitting at Darrens collecting dust
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft 
18-08-2013, 09:08 PM
Brilliant progress mate, must be nearly there for a test drive now!
Was wondering what that loud noise was the other day, must have your car starting
Daily Slag: http://306oc.co.uk/forum/thread-3849.html
Track Slag: http://306oc.co.uk/forum/thread-8873.html
19-08-2013, 01:41 PM
Yesss!!! Someone bought it I was going to but then blew mine to shit so glad youve bought it of all people too as it WILL get used as it should
cant wait to see this going when done
![[Image: J5hxCcC.jpg]](https://i.imgur.com/J5hxCcC.jpg)
19-08-2013, 01:49 PM
Epic dan, glad to see this running nicely for you
bet you have a grin like a cheshire cat lol
![[Image: car-1.jpg]](http://i1117.photobucket.com/albums/k591/grant-306/car-1.jpg) Member of the 99% warning or you're nothing club 2000 Moonstone 1.8 Meridian - Sold 2000 China 3dr XS - Dead 1998 Diablo 3dr XSI
20-08-2013, 05:35 PM
(This post was last modified: 20-08-2013, 05:37 PM by londondan86.)
(18-08-2013, 12:17 AM)Matt2507 Wrote: Noise was epic from this!!! Definitely woke the neighoursHaha! Sure was matey! (18-08-2013, 06:27 PM)Niall Wrote: Glad to see this is back in use and still on this forum rather than the charger sitting at Darrens collecting dust Yea cheers mate, should be on the road soon now (18-08-2013, 09:08 PM)c.gerrard Wrote: Brilliant progress mate, must be nearly there for a test drive now! Yea its coming along quite quikly now, it would be quicker although most of the work can only be done at weekends!(19-08-2013, 01:41 PM)CJ_Derv Wrote: Yesss!!! Someone bought it I was going to but then blew mine to shit so glad youve bought it of all people too as it WILL get used as it should Nice one buddy!! I'm glad its me who got it too!! lol As said already though, it won't be getting pushed as hard as Darrens for a while as his blew a few rods before he went forged and i cant afford to keep fixing it! (19-08-2013, 01:49 PM)Grant Wrote: Epic dan, glad to see this running nicely for you Yes mate! As soon as it started I was jumping like a little girl! lol I will be even more once its finished!! Update: Got all the front end back on (only one pic but I'll upload it shortly) Header tank is now mounted behind the turbo on the bulkhead Just having problems with gear linkages now so will have to have a play tomorrow hopefully to get it sorted. (thanks Darren!!) Still to do: Exhaust Gear linkages Gauges, gauges, gauges
20-08-2013, 09:07 PM
What is causing gear linkage issues?
How many gauges are you wanting? I hope it's into double figures  Car looks mint now it's all back together. Nobody knows what monster lurks beneath!!!!! Daily Slag: http://306oc.co.uk/forum/thread-3849.html
Track Slag: http://306oc.co.uk/forum/thread-8873.html
20-08-2013, 09:56 PM
(20-08-2013, 09:07 PM)c.gerrard Wrote: What is causing gear linkage issues? The gear linkage is hitting against the exhaust manifold so I can't engage 2nd 4th or reverse so some adjustments will be required (read bend the fucker out the way) Gauges, I need 2 boost, pre and post charger. Egt. Oil temp and pressure. Ipp if I can knock something up and intake air temp. Yea she's looking good now! 
20-08-2013, 10:08 PM
24-08-2013, 08:12 PM
Nearly there now! Sorted the gear linkages with a hammer so I can now get all the gears. Header tank is currently cable tied to the bulkhead so need to make up a bracket tomorrow. Exhaust is getting welded up Monday then mot Tuesday/Wednesday!!
Gauges still haven't turned up yet so can't do anything on that for now just want to get the thing going!! Anyway here is a quick vid from today showing turbo porn and supercharger epicness!!
Posts: 4,604
Threads: 90 Joined: Dec 2011 Reputation: 54 Location: Cornwall Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
24-08-2013, 08:30 PM
Idle boost FTW.
Cant wait to see some fuel thrown at it again
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia | ![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
24-08-2013, 08:41 PM
Posts: 5,902
Threads: 142 Joined: Dec 2011 Reputation: 58 Location: Hastings, East Sussex Car Model/Spec: E46 BMW 320d
Thanks: 17
Given 28 thank(s) in 28 post(s)
24-08-2013, 09:32 PM
Looking good mate, love the fact it makes boost just idling!
Sounds epic as well, cant wait to see some vids of it on the fly, bet this is gonna be a bit of a monster!
![[Image: P1060836_zpsz3xgxt7q.jpg]](http://i1101.photobucket.com/albums/g427/wingnutz2/P1060836_zpsz3xgxt7q.jpg)
24-08-2013, 09:35 PM
Posts: 20,092
Threads: 591 Joined: Nov 2012 Reputation: 54 Location: Cotswolds Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
24-08-2013, 09:52 PM
haha, boost at idle. epic
looks fine tight in that bay, no room for error...or flexi mounts! Wishes for more power...
how long are you expecting this to last dude?
Looks a epic build! 
![[Image: image_zps738f3eaa.jpg]](http://s646.photobucket.com/user/k3ogh4327/media/image_zps738f3eaa.jpg.html)
25-08-2013, 09:44 AM
(24-08-2013, 09:52 PM)Piggy Wrote: haha, boost at idle. epic Yea is bloody tight! (24-08-2013, 10:47 PM)k3ogh Wrote: how long are you expecting this to last dude? With sensible boost, no reason it won't last long enough for me to build up another engine.
Getting ready for the invitable conrod flying out the side lol gotta love tuned XUD,s hope it lasts for you bud! I would be scared to go any long distance in it
26-08-2013, 12:18 PM
(24-08-2013, 08:12 PM)londondan86 Wrote: Nearly there now! Sorted the gear linkages with a hammer so I can now get all the gears. Header tank is currently cable tied to the bulkhead so need to make up a bracket tomorrow. Exhaust is getting welded up Monday then mot Tuesday/Wednesday!! you took it for a test drive yet?
26-08-2013, 07:20 PM
Well I drove the car down to my brother in laws today so we can weld up the temporary exhaust tomorrow and then it will be going for its mot on Thursday!
I gave it the beans on the way down there and it bloody shifts!!! It's burning all the fuel, not a wisp of smoke and a nice little chatter from the turbo on lift off which is just pornographic A power steering hose had split and made a bit of a mess and the brakes really need to be used, the speedo and rev counter don't work but could just be an unplugged cable or 2! So all in I'm very happy! I'll get a few pics up tomorrow once the exhaust is done
Posts: 20,092
Threads: 591 Joined: Nov 2012 Reputation: 54 Location: Cotswolds Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
26-08-2013, 08:43 PM
(26-08-2013, 07:20 PM)londondan86 Wrote: Well I drove the car down to my brother in laws today so we can weld up the temporary exhaust tomorrow and then it will be going for its mot on Thursday! I remember my 1st drive to the mot, after I sorted the car out. I did give the car some beans on the way. Had two blokes who were waiting at the bus stop look up the road at me haha. just wait till its fully road worthy, your going to be giving chavs something to cry about and more!
27-08-2013, 02:46 PM
IDLE BOOST FTW haha love it matey really happy all has gone to plan for you!! Love the boost on a flick of throttle win win win
Gutted I never got that charger now haha
15-09-2013, 04:51 PM
This was at Combe saturday right?
MG ZR TD+ - gone and easily forgotten
Fabia vRS PD130 - New daily Astra H VXR - new toy! 
Posts: 20,092
Threads: 591 Joined: Nov 2012 Reputation: 54 Location: Cotswolds Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
15-09-2013, 06:32 PM
(15-09-2013, 05:58 PM)ginge191 Wrote: Update....!! THIS! We had to bump start the bugger......whats going on? Wishes for more power...
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Londondan's HDi Cabby Project | londondan86 | 11 | 7,967 |
07-06-2016, 12:09 PM Last Post: insomaniac45 |
|
| Carlos182's Bora Project (Exhaust Video inside) | Carlos182 | 122 | 44,036 |
26-02-2013, 06:57 PM Last Post: Carlos182 |
|
| Londondan's Smoothed Stage 2 HDi Estate 152bhp RR Vid inside! | londondan86 | 50 | 30,980 |
23-02-2013, 05:05 PM Last Post: RJDubya |
|
![[Image: signature.png]](http://s22.postimg.org/cgh3ss11t/signature.png)