Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
LDA pins, Injector refurbs, Pump mods blah blah
#1
As some know we've been builing a new garage recently, and as a result I should be able to start offering my services again, LDA grinds, Injectors refurb and calibration etc. + more.

I wont be able to start for a few weeks yet, but im putting this up now to drum up any interest and let everybody know in advance. If you have any requests or want any other bits done which might not be listed then feel free to post/pm me.

Main stuff will be;

LDA pin grind - £15
Gov mod - £25 off the car/£35 on car (includes pump setup/fine tuning)
Injector refurbishment (Full strip down, all parts cleaned and pressures calibrated) - £8/injector
Injector refurbishment + new nozzles - £24/injector
Cambelt change - £80
Cambelt + Bosch fitting and pump setup- £115
Turbo change - £120

Can also supply almost any pump or injector parts (gov cradles, fuel screws, lda housings, leversets etc) Just PM me with your request and il get back to you with a price.

Also, can offer any custom work like exhausts/bodywork etc, but again PM me with details and il work something out.

Also, im not sure what the deal is with 'trading' on here, but il PM Scott in a bit and I intend to donate 10% of any sales which are conducted through the forum.

Thanks, Dan.
Thanks given by:
#2
are you doing this from home?. shame your to far away i wouldnt mind another pump putting on. mine got rust in there and for 20psi it smokes alot
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Thanks given by:
#3
Some stuff will be work related like supplying replacement pump parts/injector nozzles etc, but all vehicle work is done at home and entirely outside of work.

If you feel like having a drive down then let me know man Smile
Thanks given by:
#4
See my exhaust thread for your first booking <3
Thanks given by:
#5
Amazing news, expect a set of injectors for refurb/nozzles from me Smile
Thanks given by:
#6
(04-10-2012, 06:29 PM)JJ0063 Wrote: See my exhaust thread for your first booking <3

Don't think so boyo! Had my td04 turbo change down for a while now Wink
[Image: edit2_zpsbe60b3ca.jpg]

Team derv FLAME and CONROD spitters
Thanks given by:
#7
You still have no adapter plates or oil line Mowle lol

Thanks Jordan and ZX Smile
Thanks given by:
#8
Will be needing LDA grind soon, I'll send you a message when it's ready bud!
MG ZR TD+ - gone and easily forgotten
Fabia vRS PD130 - New daily
Astra H VXR - new toy!
Thanks given by:
#9
I tried finding that place for the steel today but got very fu*ked off with people's driving round Yarmouth! So I'm going back tomorrow. I'm waiting on a phone call from you to say we can go get the oil lines!!!!!!
[Image: edit2_zpsbe60b3ca.jpg]

Team derv FLAME and CONROD spitters
Thanks given by:
#10
Yeah im waiting for a call from the Pirtek man about oil lines aswel. Make sure you get stuff that is 8mm thick and about 30cmx30cm minimum.
Thanks given by:
#11
I've got a text from Ben with all the info I need to get them just need to look for the place properly.
[Image: edit2_zpsbe60b3ca.jpg]

Team derv FLAME and CONROD spitters
Thanks given by:
#12
I assume this is all for XUD's, or can you do HDi injectors?
Welding and fabrication projects undertaken, contact me for more information.

Thanks given by:
#13
Jonny - Yeah these prices are for xud/mechanical injectors only. We do do common rail injectors at work, but the prices won't be anywhere near what I'm charging as it will be all legit through work etc.
Thanks given by:
#14
Go on.. how much?
Welding and fabrication projects undertaken, contact me for more information.

Thanks given by:
#15
Dont know off the top of my head, I barely ever do the CR injectors at work. I can find out for you tomorrow Smile
Thanks given by:
#16
Am after a ground lda pin,
Thanks given by:
#17
Injector refurbishment (Full strip down, all parts cleaned and pressures calibrated) - £7/injector

Im interested in this
Thanks given by:
#18
Ill be sending you a pin in a few weeks Smile
Thanks given by:
#19
Think il be gettin injectors with new nozzles very soon then just got to fond some spares in scrappers so not off the road cracking prices them dan!!
[Image: signature2-1.jpg]
Thanks given by:
#20
Bumpt.
Thanks given by:
#21
Stuck this thread for you Dan Smile
Thanks given by:
#22
can you provide a LDA pin already grinded?
Thanks given by:
#23
Yeah sure, although I'd be looking at £20 for one as I would have to source a pin first, where's the £13 price is for an exchange pin.
Thanks given by:
#24
I can vouch for dans work, absolutely spot on and decent prices
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
Thanks given by:
#25
I will be interested in having my lda ground and gov modded when you start doing the work mate, pm me when you start cheers
Thanks given by:
#26
got a spare pin i can send Dan and just knock a couple of quid off my bill for injector refurb when i get round to it Smile saves you sourcin one lol
[Image: signature2-1.jpg]
Thanks given by:
#27
I can vouch for Dan's work too, pre-Robocop-arm-incident.

Should be even better now with his precision hydraulic limbs
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
#28
(07-10-2012, 08:30 PM)Dan! Wrote: Yeah sure, although I'd be looking at £20 for one as I would have to source a pin first, where's the £13 price is for an exchange pin.

ok bud, so what sort of price you it be for you to provide and grind a pin for me? i want to keep standard 1 just incase i ever want to put it back in.
Thanks given by:
#29
Thanks for the kind words fellas.

I'll make sure I post in here and pm all interested when I'm ready. Got the garage roof on today, lighting all up and the work bench built! Smile


nufc4frosty ' Wrote: ok bud, so what sort of price you it be for you to provide and grind a pin for me? i want to keep standard 1 just incase i ever want to put it back in.

Sorry man, my post wasn't that clear - £20 to supply and grind a pin, including postage.
Thanks given by:
#30
In fact Dan I think I still have my spare pin here if you want it?

Sure you'll do me a favour in return one day
[Image: signature_zps1a02ba79.jpg]
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Bosch and lucas injector pump sprockets. ConorTRG 4 1,545 24-08-2013, 01:26 AM
Last Post: ConorTRG
  Lucas to Bosch changing pins on bracket? Danny2009 3 1,589 12-02-2013, 03:39 PM
Last Post: Danny2009
  406 pump mods philb 5 3,171 14-08-2012, 04:28 PM
Last Post: philb

Forum Jump:


Users browsing this thread: 1 Guest(s)