+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: LDA pins, Injector refurbs, Pump mods blah blah (/showthread.php?tid=6719)
LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 04-10-2012
As some know we've been builing a new garage recently, and as a result I should be able to start offering my services again, LDA grinds, Injectors refurb and calibration etc. + more.
I wont be able to start for a few weeks yet, but im putting this up now to drum up any interest and let everybody know in advance. If you have any requests or want any other bits done which might not be listed then feel free to post/pm me.
Main stuff will be;
LDA pin grind - £15
Gov mod - £25 off the car/£35 on car (includes pump setup/fine tuning)
Injector refurbishment (Full strip down, all parts cleaned and pressures calibrated) - £8/injector
Injector refurbishment + new nozzles - £24/injector
Cambelt change - £80
Cambelt + Bosch fitting and pump setup- £115
Turbo change - £120
Can also supply almost any pump or injector parts (gov cradles, fuel screws, lda housings, leversets etc) Just PM me with your request and il get back to you with a price.
Also, can offer any custom work like exhausts/bodywork etc, but again PM me with details and il work something out.
Also, im not sure what the deal is with 'trading' on here, but il PM Scott in a bit and I intend to donate 10% of any sales which are conducted through the forum.
Thanks, Dan.
RE: LDA pins, Injector refurbs, Pump mods blah blah - karl1989 - 04-10-2012
are you doing this from home?. shame your to far away i wouldnt mind another pump putting on. mine got rust in there and for 20psi it smokes alot
RE: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 04-10-2012
Some stuff will be work related like supplying replacement pump parts/injector nozzles etc, but all vehicle work is done at home and entirely outside of work.
If you feel like having a drive down then let me know man
RE: LDA pins, Injector refurbs, Pump mods blah blah - 1616six - 04-10-2012
See my exhaust thread for your first booking <3
RE: LDA pins, Injector refurbs, Pump mods blah blah - zx_volcane - 04-10-2012
Amazing news, expect a set of injectors for refurb/nozzles from me
RE: LDA pins, Injector refurbs, Pump mods blah blah - David - 04-10-2012
(04-10-2012, 06:29 PM)JJ0063 Wrote: See my exhaust thread for your first booking <3
Don't think so boyo! Had my td04 turbo change down for a while now
RE: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 04-10-2012
You still have no adapter plates or oil line Mowle
Thanks Jordan and ZX
RE: LDA pins, Injector refurbs, Pump mods blah blah - Dicky - 04-10-2012
Will be needing LDA grind soon, I'll send you a message when it's ready bud!
RE: LDA pins, Injector refurbs, Pump mods blah blah - David - 04-10-2012
I tried finding that place for the steel today but got very fu*ked off with people's driving round Yarmouth! So I'm going back tomorrow. I'm waiting on a phone call from you to say we can go get the oil lines!!!!!!
RE: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 04-10-2012
Yeah im waiting for a call from the Pirtek man about oil lines aswel. Make sure you get stuff that is 8mm thick and about 30cmx30cm minimum.
RE: LDA pins, Injector refurbs, Pump mods blah blah - David - 04-10-2012
I've got a text from Ben with all the info I need to get them just need to look for the place properly.
RE: LDA pins, Injector refurbs, Pump mods blah blah - Jonny81191 - 04-10-2012
I assume this is all for XUD's, or can you do HDi injectors?
Re: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 04-10-2012
Jonny - Yeah these prices are for xud/mechanical injectors only. We do do common rail injectors at work, but the prices won't be anywhere near what I'm charging as it will be all legit through work etc.
RE: LDA pins, Injector refurbs, Pump mods blah blah - Jonny81191 - 04-10-2012
Go on.. how much?
RE: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 04-10-2012
Dont know off the top of my head, I barely ever do the CR injectors at work. I can find out for you tomorrow
LDA pins, Injector refurbs, Pump mods blah blah - dturbopeck - 04-10-2012
Am after a ground lda pin,
RE: LDA pins, Injector refurbs, Pump mods blah blah - Josh_Quant - 04-10-2012
Injector refurbishment (Full strip down, all parts cleaned and pressures calibrated) - £7/injector
Im interested in this
RE: LDA pins, Injector refurbs, Pump mods blah blah - Bananalad - 04-10-2012
Ill be sending you a pin in a few weeks
RE: LDA pins, Injector refurbs, Pump mods blah blah - CJ_Derv - 04-10-2012
Think il be gettin injectors with new nozzles very soon then just got to fond some spares in scrappers so not off the road cracking prices them dan!!
Re: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 06-10-2012
Bumpt.
RE: LDA pins, Injector refurbs, Pump mods blah blah - Scott - 06-10-2012
Stuck this thread for you Dan
RE: LDA pins, Injector refurbs, Pump mods blah blah - Frosty - 07-10-2012
can you provide a LDA pin already grinded?
Re: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 07-10-2012
Yeah sure, although I'd be looking at £20 for one as I would have to source a pin first, where's the £13 price is for an exchange pin.
RE: LDA pins, Injector refurbs, Pump mods blah blah - declantg - 07-10-2012
I can vouch for dans work, absolutely spot on and decent prices
RE: LDA pins, Injector refurbs, Pump mods blah blah - Ryan@306 - 07-10-2012
I will be interested in having my lda ground and gov modded when you start doing the work mate, pm me when you start cheers
RE: LDA pins, Injector refurbs, Pump mods blah blah - CJ_Derv - 07-10-2012
got a spare pin i can send Dan and just knock a couple of quid off my bill for injector refurb when i get round to it
saves you sourcin one lol
RE: LDA pins, Injector refurbs, Pump mods blah blah - cwspellowe - 07-10-2012
I can vouch for Dan's work too, pre-Robocop-arm-incident.
Should be even better now with his precision hydraulic limbs
RE: LDA pins, Injector refurbs, Pump mods blah blah - Frosty - 07-10-2012
(07-10-2012, 08:30 PM)Dan! Wrote: Yeah sure, although I'd be looking at £20 for one as I would have to source a pin first, where's the £13 price is for an exchange pin.
ok bud, so what sort of price you it be for you to provide and grind a pin for me? i want to keep standard 1 just incase i ever want to put it back in.
Re: RE: LDA pins, Injector refurbs, Pump mods blah blah - Dan! - 07-10-2012
Thanks for the kind words fellas.
I'll make sure I post in here and pm all interested when I'm ready. Got the garage roof on today, lighting all up and the work bench built!
nufc4frosty ' Wrote: ok bud, so what sort of price you it be for you to provide and grind a pin for me? i want to keep standard 1 just incase i ever want to put it back in.
Sorry man, my post wasn't that clear - £20 to supply and grind a pin, including postage.
RE: LDA pins, Injector refurbs, Pump mods blah blah - cwspellowe - 07-10-2012
In fact Dan I think I still have my spare pin here if you want it?
Sure you'll do me a favour in return one day