Smallest wheels to fit dturbo brakes

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Smallest wheels to fit dturbo brakes
#1
Am I right in thinking the smallest wheel to get over dturbo brakes are 14"

My 13's just aren't big enough! 

If so, anyone have a set?
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#2
what are you calling Dturbo brakes noob? Big Grin
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#3
Xud DTurbo brakes were shitty 247s, they were also fitted to 1.4s with 13" steels...

If you've got 266s from a hdi/xsi etc you need 14s...
Reply
Thanks given by: ginge191
#4
Im pretty sure 13" will go over the d turbo 247mm brakes but think it needs to be 13" wheels off a 306 as they are different to 205 1s.
Reply
Thanks given by:
#5
(24-09-2016, 07:25 PM)Toms306 Wrote: Xud DTurbo brakes were shitty 247s, they were also fitted to 1.4s with 13" steels...

If you've got 266s from a hdi/xsi etc you need 14s...

Apologies all, they're 266's! 

Answered my question, thanks!
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#6
(24-09-2016, 06:08 PM)Mattcheese31 Wrote: what are you calling Dturbo brakes noob? Big Grin
THIS!!!

DTurbo is a trim level!!


(24-09-2016, 07:25 PM)Toms306 Wrote: Xud DTurbo brakes were shitty 247s, they were also fitted to 1.4s with 13" steels...

If you've got 266s from a hdi/xsi etc you need 14s...
Also this!
Also if you were talking about a 307 DTurbo then some of them had 302mm brakes that won't fit under anything less than 16"s
Reply
Thanks given by:
#7
Steelies from a 206 have same fitment as 205/306's correct?
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#8
bolt pattern yes, offset not so much, they tend to be deeper.
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
#9
(25-09-2016, 07:42 PM)welshpug Wrote: bolt pattern yes, offset not so much, they tend to be deeper.

How do you think they'll do on the 205?
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#10
306 or xsara wheels are more suitable
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
#11
(25-09-2016, 07:56 PM)welshpug Wrote: 306 or xsara wheels are more suitable

Couldn't source any.. Chap only wants £15 for them. Will see how they get on.
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#12
eh? there's hundreds/thousands out there!
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
#13
(25-09-2016, 08:22 PM)welshpug Wrote: eh?  there's hundreds/thousands out there!

Without paying through the teeth for them... Living on an island also, postage etc, most won't do it.

I'm going to have a look at these wheels tomorrow, sure they should be fine
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Upgrading to 283mm brakes on Dturbo Hobo Ash 15 3,601 01-07-2017, 11:34 AM
Last Post: Hobo Ash
  266mm brakes under volcane wheels Chris_90 6 1,785 29-04-2015, 11:38 AM
Last Post: welshpug
  Phase 2 dturbo.with hdi brakes HDIkyle 6 1,696 17-02-2014, 05:12 PM
Last Post: Toms306

Forum Jump:


Users browsing this thread: 1 Guest(s)