27-07-2014, 11:14 AM
Hi,
I have an issue with my brake discs, they seem to get really hot even if I use very little of braking. As well as makes squeeky noise.
Have replaces the discs and pads recently, checked the cylinders the move as new and rubbers around as in tact not ripped...the discs as not warped either, cause you could see by the colour as well as I did driving test by pressing brake pedal slightly so see if there is any vibration on the pedal, but there was not.
Also when letting it go downhill it seems to be braking when in neutral..
Break hoses seem to be ok too.
I dont know what else it could be...
Is it possible that the rubber around the cylinders could be too stiff and now since everything was changed they have moved out of place and they are causing the cylinders not to return completely, making them brake and squeek?
I have an issue with my brake discs, they seem to get really hot even if I use very little of braking. As well as makes squeeky noise.
Have replaces the discs and pads recently, checked the cylinders the move as new and rubbers around as in tact not ripped...the discs as not warped either, cause you could see by the colour as well as I did driving test by pressing brake pedal slightly so see if there is any vibration on the pedal, but there was not.
Also when letting it go downhill it seems to be braking when in neutral..
Break hoses seem to be ok too.
I dont know what else it could be...
Is it possible that the rubber around the cylinders could be too stiff and now since everything was changed they have moved out of place and they are causing the cylinders not to return completely, making them brake and squeek?