Stanced XUD Estate (IT'S ALIVEEEEahahaha)

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Stanced XUD Estate (IT'S ALIVEEEEahahaha)
cwspellowe Wrote:Patience young dan, only just in from work and am fecking starving!

Me, impatient?



Never...... :angelic-little:


whistle
Thanks given by:
Pics..........LOL

I am impatient, hurry up lol
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Thanks given by:
OK, pics up. But you need to read the text too or they won't make sense.

Ahhhh yeah they will, basically this

[Image: IMG_0185.jpg]

Plus this

[Image: IMG_0186.jpg]

And some high temp spray glue (which, for what it is, is f*cking expensive!) equals THESE!

[Image: IMG_0188.jpg]

[Image: IMG_0189.jpg]

Going to do the A, B and C pillars in the same stuff, and the roof lining in the black version of the same material.

Plush interior trim LIKE A BOSS.

Oh and also here's the start of my stanceboard. Brand new deck but only cost £20, got it because the colours match the car and it says "hit the deck" on the bottom. Quite apt.

[Image: IMG_0123.jpg]

[Image: IMG_0124.jpg]

Oh and lastly some arty crap. Not bad for an iPhone picture tbh.

[Image: edit1.jpg]

Bo selecta.
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
Looks swish. I like it Big Grin Big Grin
Thanks given by:
I've done my a pillars in black suede and it's much nicer driving at night as you don't get any reflection off of them. Looking good!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Thanks given by:
Neil Wrote:I've done my a pillars in black suede and it's much nicer driving at night as you don't get any reflection off of them. Looking good!
Reflections from the pillars wtf! Never seen that

Do love the red idea though :-)
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Thanks given by:
Looking good boss!! Just hurry up will ya ha ha
[Image: SDC10442-1.jpg]
Thanks given by:
looking nice Big Grin Cant wait to see the finished product
[Image: 306ocsig_edited-1-1.jpg]


306 HDI, soon to be XUD
Thanks given by:
Ah the finished project is a long way off! I have a Bosch on the way now though for when I finally get the engine sorted. Bosch + T2 should do me nicely for now.

Had a couple of hours spare after work today so started more trimming. A-pillars are done, as seen earlier, i've now done the roof lining in black suede too. Looks nice and blush, just need to decide what to do with the visors and handles, black paint will look gash on them!

Some pics for your amusement. Ignore the wrinkles at the front of the headlining, they've been moved to where the centre light covers them so you won't see any in the car.

[Image: DSC07560.jpg]

[Image: DSC07562.jpg]

A-pillars test fitted

[Image: IMG_0196.jpg]

And look what turned up in the post today from Germany! Some laser cut flat caps for the wheels, along with four countersink bolts and some German Haribo <3 And looky look, they fit perfectly! Paint tomorrow me thinks.

[Image: IMG_0197-1.jpg]

[Image: IMG_0191.jpg]

And the pimpmobile in all its, erm, glory? More tomorrow

[Image: IMG_0195.jpg]
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
Black paint looks fine on the visors and plastics. I did mine inatt black. Will take a photo for you tomorrow if you like?
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Thanks given by:
Aye please. Did you use plastic primer or just paint straight on? I painted the plastics on the gti6 but wasnt sure about handles etc
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
Used primer on the handles and centre console but the visors I just painted straight onto. Have to give them a bloody good clean first though as you'd be supprised how dirty they are!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Thanks given by:
Do like this mate! Looks good
Kris done his roof lining black and kept everything else how it was. The contrast looked pretty good!
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Thanks given by:
Erm, you should see the ones in the estate! Someone's written all over them in biro and they're all nicotine stained haha
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
Oh right haha yeah definatly give them some care lol
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Thanks given by:
Bit more for today, didn't get much done though as i've been stripping the gti6 further ready to go to the scrap man.

Got the headlining fitted, bit pissed off as the headlining creased quite a lot when I was trying to get it back in the car, most of it flattened out again but some bits are still creased. Typical. Looks good though! Ran out of glue so couldn't do the B-pillars, and i've just noticed one of the C-pillars is f*cked so am on the look out for a new'un.

[Image: IMG_0196-1.jpg]

[Image: IMG_0201.jpg]

[Image: IMG_0202.jpg]

[Image: IMG_0203.jpg]

[Image: IMG_0205.jpg]

[Image: IMG_0204.jpg]

Took one of the door cards apart too and i've decided they're also going red, just need a glue gun to stick them back together. Investigated the seats too and they're going to be a PITA so am leaving them to the professionals and saving up a bit.

It also wouldn't be my car without stickers. So yeah.

[Image: IMG_0199.jpg]

[Image: IMG_0200.jpg]

[Image: IMG_0198.jpg]

[Image: IMG_0206.jpg]

[Image: IMG_0207.jpg]

Falling in love with this car more and more every day!
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
looks sexual dude! loving the trimming! you planning on doing anything to the dash?
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Thanks given by:
Roof linings are a PITA to get in on your own. I struggled with a mate!
Personally I wouldn't have the red but it does look good!
I'm also doing my door cards at some point soon In alacantara to match the seats.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Thanks given by:
"this is my mums car"

lmao epic sticker!! where from?!!? lol
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Thanks given by:
Thinking about trimming the lower glove box in the red but undecided yet, might be a bit overkill. Makes such a massive difference to the inside of the car as it is though!

Ginge, eBay mate Wink But it's my idea, don't steal it!
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
mmmmm looks good! Whats the plan for the rub strips?
Thanks given by:
cwspellowe Wrote:Thinking about trimming the lower glove box in the red but undecided yet, might be a bit overkill. Makes such a massive difference to the inside of the car as it is though!

Ginge, eBay mate Wink But it's my idea, don't steal it!

Does make it much cosier!
I've just ordered some alacantara for my door cards. You've inspired me!

Really bad photo but these are my visors

[Image: 0edcbf6a.jpg]
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Thanks given by:
Looking good, what material did you use and where did you get it from?

Also do you have any pics of the old car with the bonnet open so I can get a good look at the aero catches?
Thanks given by:
Mark i've never owner aero catches? Got the material from eBay though, just searched for "faux suede" and found some at about £3.50/m. Not arsed that it's not real suede, it feels and looks nice and thats all that matters Smile

Ahh Neil I want your rear view mirror Sad
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
I thought you had some on the yellow 6?
Thanks given by:
Naw, was planning on getting them but never got round to it
[Image: signature_zps1a02ba79.jpg]
Thanks given by:
What glue did you use for this mate?
[Image: Foxy2.jpg]
Thanks given by:
Pompey306mark Wrote:I thought you had some on the yellow 6?

HDiKyle has a some aero catches on his estate mate Wink
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Thanks given by:
Yay stickers!

I have a form > function one in an envelope in my room which I dont want that you coulda had Tongue (it is gold though) lol
Thanks given by:
Jim I used Trim Fix high temp glue, should do the trick as it was recommended by an upholsterer I know.

Dan I have more stickers here just not put them on yet Wink
[Image: signature_zps1a02ba79.jpg]
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  rd's moonstone HDi Project - Now Stanced rd070707 99 27,958 02-05-2013, 11:05 AM
Last Post: rd070707

Forum Jump:


Users browsing this thread: 16 Guest(s)