The Racetractor. The End.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The Racetractor. The End.
Looking good mate, Amazing how rapid these are with so little boost
Thanks given by:
that picks up extremely well
Thanks given by:
pulling well!! what clutch did you run again? genuine valeo?
Thanks given by:
Impressed. Good effort!
[Image: brokendown-1-1-1.jpg]

Dturbo GT2259s build thread;
http://306oc.co.uk/forum/thread-3692.html

Daily driver; 330d Msport (doesn't blow up!)
Thanks given by:
Now that would pull the skin off a rice pudding lol

Good result mate, now have you got that smile back? Just need to retrace & fix those bodges and you'll have reliable motoring Big Grin
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Thanks given by:
standard valeo clutch.

Under bonnet issues are all sorted realy.
Bit of tidying, remove the AC pipes left and sort the oil catch tank which still isnt catching oil and its done.

interior and exterior is another ball game.

but yes my smiles per gallon have gone up considerably...thus my mpg has gone down a bit Rofl
Wishes for more power...
Thanks given by:
Good stuff then mate, are you now going to be running a daily "breakdown free" counter from the last breakdown lol
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Thanks given by:
yea! lol

all has been fine for nearly 500miles!
Wishes for more power...
Thanks given by:
(28-10-2013, 04:54 PM)Piggy Wrote: yea! lol

all has been fine for nearly 500miles!

It's been a lot ballache for you, once the teething issues have been sorted it should be ok - remember it's a combination of bits Smile
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Thanks given by:
just need to raise the back up 15-20mm n get my stereo system n flocking sorted then polish the bodywork up in spring
Wishes for more power...
Thanks given by:
Need to update this with your flocking pics Smile
[Image: untitled_zps1adc0365.png]
138 BHP XSI
(21:20:51) Just_Sean: i had a pokey bum wank in the bath once and i shit you not, i burped a bubble
Thanks given by:
(25-10-2013, 07:36 AM)Dum-Dum Wrote: Looking good mate, Amazing how rapid these are with so little boost

All that extra displacement eh Chris? Tongue
Welding and fabrication projects undertaken, contact me for more information.

Thanks given by:
Got loads more to flock yet.
main issue is stereo.. once thats sorted I can flock the trim its mounted to.
I could do with selling some bits to pay off my overdraft/GT loan...then I can order the coloured fkock I want
Wishes for more power...
Thanks given by:
currently trying to sort a horrid interference issue cauzing horrid buzzing through me amps...

in the meantime:

   
   
   
   

Big Grin
Wishes for more power...
Thanks given by:
OMFG, SO MUCH WANT!!!!

[Image: attachment.php?thumbnail=11295]
Thanks given by:
send one my way and I'll do it Smile

see my thread about flocking... Smile
Wishes for more power...
Thanks given by:
ok...no real update.

raised the beam by 10mm. so nice to have such a young beam in great nick thats all greased up...was so easy.

waiting for new winter tyres to be fitted to winter wheels as my 185/65s touch the bilsteins weirdly.

also made my adjustable compbrake shifter non asjustable and it kept coming apart. welder with a sleeve or two and some modifyin means now it wont come apart and 1st and 5th or more achieveable.

boost now also up to 1.3bar.

still fighting weird interference with stereo so ICE/boot/flocking install has stalled somewhat due to that.

spent many many hours tracing and testing...nearly there

oh n MOT due very soon Undecided
Wishes for more power...
Thanks given by:
i have a random erge to throw fruit at your car as a result of jealousy
Thanks given by:
Just watched your vid looked pretty around well done
[Image: mike_sig_zpsd438fb98.jpg]


Thanks given by:
stereo HU replaced with cheapo JVC....now all fine. bloody thing.

1.3bar means 3rd gear wheel spins regular! lol

but weird slight high voltages...around 15-15.5v when driving....but no hot wires or problems. must keep eye on that.

also need some GTi front caliper seals to rebuild my brakes
Wishes for more power...
Thanks given by:
Sooooo...

tried to go to minehead and back again...this time she made it there n back without missing a beat! happy days!!!

on a side note, got a leaking injector I think :-(

but sorted, temp anyway, my oil breather spitting oil everywhere:

   

lmao
Wishes for more power...
Thanks given by:
This engine hates oil. Inside it anyway
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Thanks given by:
Guna go to pug dealer today and get a couple of pipes as some have perished and are seeping oil.

If I sort those, a new dipstick, the leaky injector and the breather....I may just have stopped all the dribbles.

Then I can reaccess the aux setup tensioner which looks like its on the skiv Sad Doh

MOT friday...wonder what he will think of my milk bottle?! Undecided
Wishes for more power...
Thanks given by:
lol this car looks so much fun, i shouldn't have thought the milk bottle will be an issue in itself - as long as it's nice and secure Tongue
Project: Formula Peugeot
Thanks given by:
(02-12-2013, 02:47 PM)John1.4 Wrote: lol this car looks so much fun, i shouldn't have thought the milk bottle will be an issue in itself - as long as it's nice and secure Tongue

cant you see the OEM cable tie!? Whats not secure about that Tongue

I want to get all these stupid gremlins sorted then I can begin flocking stuff and get the boost up to 1.5bar and release some more gremlins!!!

Oh yeah, did I mention the whinning through the stereo amp from the alternator has returned for some reason! Angry
Wishes for more power...
Thanks given by:
As I said in the other thread, try another alternator just in case yours maybe duff Smile
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Thanks given by:
Yeah I may try a complete diff aux setup as the tensioner/buffer has gone skew
Wishes for more power...
Thanks given by:
well.....

   
Wishes for more power...
Thanks given by:
so...it passed!

as you can see.

Weird advisories...oil leak is a fuel leak from the injector. Lowering isnt significant, and I know it is, so not sure why he put that. And its a diesel engine.....so?!
Advisories are there as something to correct within the next 6months, thats what the old MOT cert used to say, how do I correct that it now has a diesel engine....convert it back!??

Ironically, nothing at all was said about the ABS or AIRBAGS!!
Wishes for more power...
Thanks given by:
203 miles since last mot lol

has it always been diseasel?
Thanks given by:


Forum Jump:


Users browsing this thread: 3 Guest(s)