Frosty's Ph1 Black D Turbo now with VNT

[Frosty]

FMIC ordered today. had 10% off so i fort i better snap 1 up

http://www.ebay.co.uk/itm/TwinPass-Inter...3372ac819c

[Frosty]

So the plan is to have the body work sorted out in the new year hopefully in January. I got a few more days to take off as holiday and got my overtime to use against the body work so should be happy days. So I haven't touched the car really since I took It off the road apart from starting it up every now and then though I have been buying a few bits ready to go on when I get round to it.

I got a twin pass intercooler


Gov modded part


Grounded LDA pin




Braided brake lines


Set of challengers. Tried them out on my S16 when I got them


Also got another set of cyclones that I plan to referb in gunmetal grey. Also got some wind deflector, Gti6 front brakes and master cylinder. I have prob forgot some of the things that I have already got. So the bits I will be getting in the new year will be FMIC pipping, slim line fans, xantia inlet manifold, radiator and a few other bits and bobs. I hope to be able to give you some good updates in the new year!

[GTI 6]

Can't beat a black phase 1

[Frosty]

Can't beat a black phase 1

I do agree. I miss driving it soo much. Can't wait till I've got all the work done

[Eeyore]

looks good! Id say it was a good move losing that front bumper. it was different but i dont think it looked that great :/

[Frosty]

looks good! Id say it was a good move losing that front bumper. it was different but i dont think it looked that great :/

I liked the front bumper but everyone will have an opinion on it and I think it did look better in real life I would say. I think I am going to just get a standard 1 sprayed up and poss make up another but will see. What do you think of the rear bumper?

[rocker8742]

Sell it to me.mate :p

---

Sell it to me.mate :p

[Frosty]

Sell it to me.mate :p

---

Sell it to me.mate :p

The car or the rear bumper? Lol

[puglove]

looks good! Id say it was a good move losing that front bumper. it was different but i dont think it looked that great :/

I liked the front bumper but everyone will have an opinion on it and I think it did look better in real life I would say. I think I am going to just get a standard 1 sprayed up and poss make up another but will see. What do you think of the rear bumper?

Im not a fan of the rear bumper tbh. Corners look a bit stuck on and on their own.

[Frosty]

Each to there own I suppose. I think it just makes it different to others. I like it but it needs a bit of work so i be putting a standard 1 on

[rocker8742]

The car lol i fancy a diesel atm

[Frosty]

The car lol i fancy a diesel atm

for the MPG?

im using £50 a week in the S16

[rocker8742]

Yeah im using about that if not more lol

[Frosty]

you should look out of a cheap D turbo to play around with

[rocker8742]

Im keeping an eye out just need to find something dirt cheap

[Frosty]

Still no work has happened on this car but i went to see Sam on Sunday and i picked up some bits to go on this. I got the intercooler set up, front bumper, slam pannel, radiator and gear rods. I am tempted by his lime green bonnet but i duno wether to get it or not. I will get some pics of the bits on the weekend.

As i have got the whole intercooler set up i think the twin pass plan is out the window now. I can't wait to get cracking on with fitting the intercooler

[sam]

Lime green bonnet is calling your name dude ill get those pics up for you dude

[Frosty]

Lime green bonnet is calling your name dude ill get those pics up for you dude

I know mate I'm so tempted

[sam]

Go on

[Frosty]

What condition are the doors and wings in as i can't remeber?

[Piggy]

awesome ph1 win happening...not sure on challengers...think they suit the ph3 more but nice otherwise

[sam]

What condition are the doors and wings in as i can't remeber?

Doors mint and theres a tiny scratch above the indecater on the near side wing got to let me no dude as I no someone whos interested

[Frosty]

awesome ph1 win happening...not sure on challengers...think they suit the ph3 more but nice otherwise

Yeah i agree they look best on ph3s but i think they should look good on this. Im going to do a set of cyclones in gunmetal grey as well

---

What condition are the doors and wings in as i can't remeber?

Doors mint and theres a tiny scratch above the indecater on the near side wing got to let me no dude as I no someone whos interested

They interested in the bonnet? or the other bits?

[sam]

Other bits not the bonnet bud

[Lew_Derv_T]

Can't seem to think of any thing I forgot to mention apart from I put a dump valve on it. I know there pointless on a diesel but it puts a smile on my face so that's all that matters . Also hocked it up with some general lee air horns.

So the plan is to take it off the road at the end of the mouth for a bit of TLC. The plans for when it's off the road are:

Get the roof sorted as its got rust coming through and the paints fading

Gets some bumpers sorted and some better condition side skirts

FMIC going to get a twin pass 1 and all the bits needed like slim line fans etc

Fit 11mm modded pump with LDA pin and gov mod

Do the cam belt and water pump while I do the fuel pump

Get some challengers and hubcentirc spacers

GTI6 front brakes.

That's most of the plans but I'm sure there are lots of other little bits I will do.

Here are a few more pics

Boost gauge





The rear bumper



Will update soon. What's your forts??

not a fan of the bumper but youve tidied the back up nicely, i have my ph3 lights i just want to sort out a boot pretty much doing the same stuff as me but im more focused on interior and looks rather than the engine mods side

[Frosty]

Other bits not the bonnet bud

Ok mate. If they want them you can sell them to them as I'm not desperate for them

[Frosty]

Can't seem to think of any thing I forgot to mention apart from I put a dump valve on it. I know there pointless on a diesel but it puts a smile on my face so that's all that matters . Also hocked it up with some general lee air horns.

So the plan is to take it off the road at the end of the mouth for a bit of TLC. The plans for when it's off the road are:

Get the roof sorted as its got rust coming through and the paints fading

Gets some bumpers sorted and some better condition side skirts

FMIC going to get a twin pass 1 and all the bits needed like slim line fans etc

Fit 11mm modded pump with LDA pin and gov mod

Do the cam belt and water pump while I do the fuel pump

Get some challengers and hubcentirc spacers

GTI6 front brakes.

That's most of the plans but I'm sure there are lots of other little bits I will do.

Here are a few more pics

Boost gauge





The rear bumper



Will update soon. What's your forts??

not a fan of the bumper but youve tidied the back up nicely, i have my ph3 lights i just want to sort out a boot pretty much doing the same stuff as me but im more focused on interior and looks rather than the engine mods side

The bumpers have seemed to get a lot of disliking on here, but its each to there own i suppose. Plus when it goes back on the road it will ahve standard bumpers back on. I got a colour coded ph3 for the rear and i got the 1 Sam had on his to go on the front that i will hopefully get colour coded to matc the rest of the car.

The boots are defo a good upgrade tbh but me and my mate put 1 on his last night and the wiring was all different but when i put mine on all the wires were ok and just plugged in

[sam]

Other bits not the bonnet bud

Ok mate. If they want them you can sell them to them as I'm not desperate for them

First come first serve dude

[Frosty]

Thats fair enough. I will let you know on the weekend. I might be going to the weston meet on Sunday so could pop over after that if i do decide to have some more bits off you.

Any luck with the pics?

[sam]

Still uploading them dude