White phase 1, now with added truck turbo and massive head gasket failure

[fan2xud]

A nice project ahead, beautiful spec has come !!
200hp, this is a stage 2,
Good thing this is not a block DHY for more 200Hp, HaHa,,,

[Dave]

Is this a stock block?

[ozonehostile]

Is this a stock block?

currently yeah, just stripped, cleaned and re-assembled with all new gaskets/seals/bearings etc

[Jimbo]

Just had a proper read through this. Car looked and sounded awesome at the meet look forward to seeing it the next rr meet where hopefully ill be bringing my dt up.

Keep up the good work

[ozonehostile]

Just had a proper read through this. Car looked and sounded awesome at the meet look forward to seeing it the next rr meet where hopefully ill be bringing my dt up.

Keep up the good work

thanks mate, by the next meet itl hopefully be even more awesome. lots of work coming up

[fan2xud]

Good luck in advance if I can help you for mapping any info on a turbo or fuel pump, do not hesitate to send a small MP ozonehostile!

[ozonehostile]

Good luck in advance if I can help you for mapping any info on a turbo or fuel pump, do not hesitate to send a small MP ozonehostile!

thanks mate

[ozonehostile]

Havnt done much recently due to work commitments, but more coming soon including a couple of purchases from the '6 forum

[Frosty]

I look forward to seeing what you got!

[cwspellowe]

Looks to be quite laggy from the graph? Still personally think the hotside is too big, if you had the engine revving to 6krpm then fair enough but it doesn't look to be at peak boost until pretty much 3krpm.

Was this not a twin scroller too?

And as said, don't worry about an 11mm until you can get it boosting clean.

[ozonehostile]

Looks to be quite laggy from the graph? Still personally think the hotside is too big, if you had the engine revving to 6krpm then fair enough but it doesn't look to be at peak boost until pretty much 3krpm.

Was this not a twin scroller too?

And as said, don't worry about an 11mm until you can get it boosting clean.

It certainly does need more revs to get the most from the turbo, gov mod is on my to do list. it is a twin scroll yes, starts spooling quite early but the revs cant build up fast enough to get it boosting hard until about 3k.

il make a vid of it on boost, fiddled a bit with the pump when i got back from the dyno and it seems to be clean on boost now

[ozonehostile]

first of my '6 forum purchases turned up yesterday. i now have a working set and loads of spares all ready to be wired in

gonna be a good weekend

[sam]

Nice buy dude

[ozonehostile]

absolutely cant wait for payday this month, so much i want to get done on this, mostly painting things white.
morettes need the masks painting white, bonnet needs doing, new bumper needs doing and i still need to get the dented roof smoothed.
been considering painting the black strip on the front bumper and the splitter white.

will be changing the rad and wiring in all the remaining gauges over the next week and its service time.

oooh and getting some 16" rims from sam so the brembos can finally be fitted along with a cheeky lower to 60mm

[Frosty]

I should be coming to the weston meet on Sunday. Looking forward to see this car again

[sam]

Whem do you want the mou ts and 16's dude? There all off and have your name rittem all over them

[richie 87]

what headlights you got on at the moment? phase 3s?

[ozonehostile]

Yeah it's got crystals off a phase 3 currently, as I write this however, I am sanding and respraying a pair of phase 1 morette lights

And Sam, I get paid end of next week so will be down to see you not long after. Can't wait for new rims

[sam]

Nice one dude

[ozonehostile]

started on the morettes today, all sanded down and ready for painting, never again though, so much sanding!

[richie 87]

whats the gap like at the bonnet with the phase 3s? they just a straight swap? trying to think of ways to freshen up my phase1 front.
cheers

[ozonehostile]

whats the gap like at the bonnet with the phase 3s? they just a straight swap? trying to think of ways to freshen up my phase1 front.
cheers

theres a pretty big gap tbh, doesnt look the best. i originally had a smooth phase 3 grill and bonnet but didnt like the look atall so put it back to phase 1 but kept the lights. i quite like the look tbh but as you can see, there are some pretty big gaps


*if you want to change the front end a bit, i have a smooth phase 1 grill for sale

[richie 87]

hmmm yh i see what you mean.
dunno what il do.
cheers dude

[ozonehostile]

a bit more work on the morettes done this morning, cold weather is a massive pain as it means it takes bloody hours for coats of paint to dry
but still, getting there

[Jonny b]

Fecking cold is doing my head in too bud!! Want to paint my mo's but

---

It's fecking cold

[ozonehostile]

yeah, im dying to paint the strips on the sedan too but they will take too long to dry ffs

[Midnightclub]

Never heard of halogen heaters? lol

[ozonehostile]

got a heater, but its a fan heater so don't want dust been blown over fresh paint

[Piggy]

how good is your perspex sunroof?! does it not make for a lot of noise and leaks?!

[ozonehostile]

how good is your perspex sunroof?! does it not make for a lot of noise and leaks?!

its not finished yet mate, need to get a tophat shape milled around the edges so that it fills the hole perfectly and can be bonded on from the underside