23-02-2014, 06:44 PM
(This post was last modified: 17-06-2014, 04:29 PM by Jonny81191.)
Yep, I've gone and bought a cabby. It's a 2.0 16v, its not that fast, nor is it boosted but the roof works and it's ORANGE!!!
Untitled by Jonny_Moore91, on Flickr
I started by taking the cyclones off and fitting steels, then bigger ones on the front because the brakes were so broken I had to upgrade to the GTi-6 ones that were happily sitting in the garage
Untitled by Jonny_Moore91, on Flickr
Untitled by Jonny_Moore91, on Flickr
Then a nice big cone filter for noisezsz!
Untitled by Jonny_Moore91, on Flickr
And for more loudnessvolumes, I took off some of the exhaust, then a bit more. So now it's got a decat, midbox, straight through peco backbox
Untitled by Jonny_Moore91, on Flickr
Untitled by Jonny_Moore91, on Flickr
It will be made low, and wide, and will be driven everywhere with the roof down.
Untitled by Jonny_Moore91, on Flickr
And if (when) I inevitably blow it up, I'll either scrap it or fit the correctly fueled engine.
Untitled by Jonny_Moore91, on Flickr
I started by taking the cyclones off and fitting steels, then bigger ones on the front because the brakes were so broken I had to upgrade to the GTi-6 ones that were happily sitting in the garage
Untitled by Jonny_Moore91, on Flickr
Untitled by Jonny_Moore91, on Flickr
Then a nice big cone filter for noisezsz!
Untitled by Jonny_Moore91, on Flickr
And for more loudnessvolumes, I took off some of the exhaust, then a bit more. So now it's got a decat, midbox, straight through peco backbox
Untitled by Jonny_Moore91, on Flickr
Untitled by Jonny_Moore91, on Flickr
It will be made low, and wide, and will be driven everywhere with the roof down.
Untitled by Jonny_Moore91, on Flickr
And if (when) I inevitably blow it up, I'll either scrap it or fit the correctly fueled engine.
Welding and fabrication projects undertaken, contact me for more information.