06-03-2012, 09:57 PM
Thanks mate. I may try and do mine in some blue material to go with the rest of the car.
Stanced XUD Estate (IT'S ALIVEEEEahahaha)
|
06-03-2012, 09:57 PM
Thanks mate. I may try and do mine in some blue material to go with the rest of the car.
06-03-2012, 10:06 PM
Foxy-jim Wrote:Thanks mate. I may try and do mine in some blue material to go with the rest of the car. One step ahead of you if it goes well.
06-03-2012, 10:07 PM
Damn. Haha. What shade of blue do you have? I was thinking a navy blue for mine.
06-03-2012, 10:36 PM
Royal blue. With black pillars and most likely black shades and handles.
06-03-2012, 10:59 PM
*AF is a Cornwall ending to numberplates btw...
That must have been bought in Cornwall - nuts!
09-03-2012, 09:37 PM
Didn't know that Ruan! Didn't know the old plates were regional?
Right had a bit more of a play now i've finally got time off! Spent most of the day with the wee man out and about so not a lot, but a bit more trimming was done. Excuse the pics, they're still coming out pinky red even after a play with the settings. Anyway here's some pics of the car looking a lot more modern in my eyes..
09-03-2012, 09:44 PM
that red on black looks epic dude! this project is full of win!
just spray gluing it on?
09-03-2012, 09:48 PM
The red centre console looks interesting! Will you be doing the carpet too?
09-03-2012, 09:49 PM
Liking the red mate my old 205 gti had red interior i loved it
Phase 1 306 Dturbo Sigma Blue a.k.a THE LADY
09-03-2012, 09:51 PM
Hitchos Wrote:Liking the red mate my old 205 gti had red interior i loved ityou had a gti?!?! hock:
09-03-2012, 09:52 PM
4WayDiablo Wrote:Hitchos Wrote:Liking the red mate my old 205 gti had red interior i loved ityou had a gti?!?! hock: yeah was about 10 years ago now why so shocked lol
Phase 1 306 Dturbo Sigma Blue a.k.a THE LADY
09-03-2012, 09:57 PM
Looks great mate. I was going to do the centre console and hand brake centre console.
Good work.
10-03-2012, 03:57 PM
Well after a very productive scrappy trip today i've decided the car is getting a FMIC to go with the Bosch and T2 setup. Why? Because I found a non-EGR inlet manifold from a Berlingo. And I paid pennies for it. In fact for the grand total of £16.80 I got this little lot...
Non-EGR inlet manifold Cam cover Phase 3 rub strips Window rubber strips that aren't bubbled Bonnet badge Spare LDA pin and compensator cap Boost compensator hose Bosch fuel lines Grenade Gear stick gaiter Not a bad little haul ay? Pin's off to Dan! to be ground, manifold is going white, cam cover red, rub strips are getting trimmed in red suede (Yes, red suede!) for shows, bonnet badge is being experimented with. Result. Need some Bosch injectors though, the ones on the 406 were with a semi-ECU controlled pump and wasn't sure if they'd be ok. Didn't have a big enough spanner either.
10-03-2012, 04:04 PM
Bargain mate, nice work
10-03-2012, 04:07 PM
Nah jim, glued onto the old material. The stuff I used is quite thin so the old stuff acts as a nice underlay.
10-03-2012, 04:09 PM
not bad haul!
how come it was 16.08 what an odd number? lol ive been looking for ph3 rub strips but can never find 3dr
10-03-2012, 04:11 PM
It was £14+VAT so £16.80 all in. Thought he said £40+VAT at first which i was still going to pay so imagine my surprise seeing the change from £50!
10-03-2012, 04:16 PM
£50 delivered sound good to you?
Got it because it clears the master cylinder easily unlike the xantia/406 one and is non-EGR as standard.
10-03-2012, 06:12 PM
Bit of panorama for you, sorry about the size.
Also anyone know what this is? Came in the post with the Bosch...
10-03-2012, 06:22 PM
The thingy in the pic is what the cold start wax stat cable connects to on the back of the pump, it goes through the little hole on the rocker and then through that thing your holding with the prog bits back over the rocker park (clear as mud I know but should make sense when looking at a pump )
10-03-2012, 06:35 PM
Cheers mark
2WayDildo nah it's a Fuji S1900 combined with a bit of photoshoppery
10-03-2012, 06:37 PM
Hahah not you aswell! Lol
Ah just wondering as my nexus does the panorama well
12-03-2012, 07:41 PM
I had my doubts about the red inside, but from that panorama i think it looks awesome.
12-03-2012, 07:46 PM
those door cards and pillar trims are gorgeous!
top work!
Diablo Hdi Dturbo and 205 1.9 project - it lives!
12-03-2012, 08:04 PM
how easy is it to separate the fabric part of the door from the plastic?
SOLD Dan! Wrote:Want me to blow this one up for you aswel? |
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
rd's moonstone HDi Project - Now Stanced | rd070707 | 99 | 27,968 |
02-05-2013, 11:05 AM Last Post: rd070707 |