Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
05-02-2014, 07:49 PM
(This post was last modified: 20-06-2014, 07:07 AM by Lwilliams.)
Hi,
Decided to scrap the idea of building a xud as funds won't allow it  . Reason being I already have another project on the go ('6)... Thought it would cost less than it has. So unfortunately this stuff has to go to fund the other project...
Not trying make money, just to get it back. This stuff was from c.gerrard and his 173 bhp xud:
Bosch pump, lines and injectors (with wood-ruff key pulley etc..) : £120 SOLD
TDO4: £100 Also has braided line as seen in picture
[attachment=13370][attachment=13371]
Exhaust: £170 NOW SOLD
Fmic: £200 SOLD - core is 450 x 175 x 65 mm and dia of 2.25
[attachment=13375][attachment=13827][attachment=16090]
Manifold: £40 NOW SOLD
Here is the write-up from Carl when I purchased them...
"TDO4 - Welded to the manifold. Wastegate welded shut. No shaft play at all when it went on in April. EGT probe fitted (I'll supply the gauge as well)
FMIC - Everything was new when it went on at the end of September, so that will be fine."
None of the above items have been changed just stored in a garage.
Other items I have for sale:
Td04 - bought around 2 weeks ago, small amount of play : £100 SOLD
[attachment=13616][attachment=13617]
New Arp direct fit bolts - ZXvolcanes group buy: £200 SOLD
Xud engine and box (no turbo) - bought from a guy breaking a 306 on eBay: NOW SOLD
New TD04 adapter plate from zekegti6 for t2 manifold: £30
[attachment=13614]
I will post items at buyer's expense.
Don't really want to come down on prices as this is what I paid for these items.
Posts: 242
Threads: 49
Joined: Jan 2014
Reputation:
0
Location: portsmouth
Car Model/Spec: HDI phase 3
Thanks: 0
Given 0 thank(s) in 0 post(s)
How much is the fmic and kit or the kit it's self!
Got to love it when you have no idea
Posts: 367
Threads: 36
Joined: Sep 2012
Reputation:
2
Location: Newcastle
Car Model/Spec: PH2 Dturbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
Does the TD04 that is welded to the manifold come with elbow to match downpipe?
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
05-02-2014, 08:44 PM
(This post was last modified: 05-02-2014, 08:46 PM by Lwilliams.)
(05-02-2014, 08:28 PM)camoturd Wrote: How much is the fmic and kit or the kit it's self!
The FMIC comes with all piping to route to the inlet manifold, that is £200. Not sure what you mean by the kit its self?
(05-02-2014, 08:40 PM)Dean Wrote: Does the TD04 that is welded to the manifold come with elbow to match downpipe?
No sorry mate it was used with the custom 3" exhaust that fits directly on to it.
Posts: 1,204
Threads: 195
Joined: Jul 2013
Reputation:
6
Location: Wolverhampton
Car Model/Spec: 2000 Xs 1.8 16v
Thanks: 0
Given 0 thank(s) in 0 post(s)
Send us pictures of the Fmic mate interested 
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
(05-02-2014, 08:48 PM)underground375 Wrote: Send us pictures of the Fmic mate interested
Will do as soon as I get home from work tomorrow mate 
Posts: 5,203
Threads: 110
Joined: Jan 2012
Reputation:
20
Location: Devon
Car Model/Spec: Estate, DT, GTI6 and 205
Thanks: 1
Given 30 thank(s) in 30 post(s)
(05-02-2014, 08:48 PM)underground375 Wrote: Send us pictures of the Fmic mate interested
Theres some pics of it in Carl's project thread
http://306oc.co.uk/forum/thread-3849-page-5.html
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Thanks: 0
Given 0 thank(s) in 0 post(s)
Someone buy that heroic exhaust!!
Doesnt even own a 306.
Posts: 2,607
Threads: 136
Joined: Jun 2013
Reputation:
11
Location: Basingstoke/Reading
Car Model/Spec: 306 hdi stage 2 & 205 DTI
Thanks: 6
Given 39 thank(s) in 39 post(s)
I'll take inlet manifold. Can you pm me your PayPal please
Posts: 4,604
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
Pm me a price posted on the Nile skirts sorry am on phone
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
Posts: 896
Threads: 42
Joined: Apr 2012
Reputation:
2
Location: Lakes District
Car Model/Spec: 1.9 XUD
Thanks: 0
Given 0 thank(s) in 0 post(s)
Oi, lazy sod. Do your own write up 
Good luck with everything, none of you will be let down with anything for sale here
Posts: 2,607
Threads: 136
Joined: Jun 2013
Reputation:
11
Location: Basingstoke/Reading
Car Model/Spec: 306 hdi stage 2 & 205 DTI
Thanks: 6
Given 39 thank(s) in 39 post(s)
Posts: 255
Threads: 30
Joined: Sep 2012
Reputation:
5
Location: Southport
Car Model/Spec: Smokey Estate
Thanks: 0
Given 0 thank(s) in 0 post(s)
Posts: 1,756
Threads: 79
Joined: Jun 2012
Reputation:
17
Location: Stroud, Gloucestershire
Car Model/Spec: Down and out HDi racestate
Thanks: 0
Given 0 thank(s) in 0 post(s)
Arp studs dont fit a hdi do they?
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
(15-02-2014, 11:09 PM)PE02KHG Wrote: Arp studs dont fit a hdi do they?
Not sure mate I know there was a thread around with some one asking the question, "/ don't know what the out come was though 
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
Added another FMIC picture as requested...
Posts: 257
Threads: 56
Joined: Apr 2012
Reputation:
1
Location: scarborough
Car Model/Spec: phase 2 d turbo in blaze
Thanks: 0
Given 0 thank(s) in 0 post(s)
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
26-02-2014, 06:15 AM
(This post was last modified: 26-02-2014, 06:17 AM by Lwilliams.)
(25-02-2014, 05:50 PM)zekegti6 Wrote: Do you have the spacers
Sorry mate decided to keep the spacers now
(25-02-2014, 05:59 PM)Piggy Wrote: ARP studs gone yet?
Not yet bud
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Thanks: 0
Given 0 thank(s) in 0 post(s)
Do you have a GT15 oilo line for sale?
Doesnt even own a 306.
Posts: 409
Threads: 137
Joined: Apr 2013
Reputation:
6
Location: Cornwall
Thanks: 0
Given 0 thank(s) in 0 post(s)
Is the td04 a ready to bolt on?
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
02-03-2014, 06:28 PM
(This post was last modified: 02-03-2014, 06:35 PM by Lwilliams.)
(01-03-2014, 06:43 PM)Tom Wrote: Do you have a GT15 oilo line for sale?
Sorry mate, no GT 15 oil line for sale.
(01-03-2014, 07:51 PM)paul7278 Wrote: Is the td04 a ready to bolt on?
The one with the braided oil line is ready to bolt on, I'm pretty sure it's been clocked etc.
The other turbo is completely standard, although there's a lot less play in the shaft.
The reason why I priced them the same is because the one has a braided line with a fair amount of play (there should be less play when there's oil pressure going through it as that takes up some slack), whereas the other one has no braided line and very little play.
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
To the top
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
24-03-2014, 07:52 AM
(This post was last modified: 24-03-2014, 11:59 AM by Lwilliams.)
Update with ARP bolts sold
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
Any budge on the spacers? Can get set of 4 new with extended bolts for £72
Posts: 1,213
Threads: 92
Joined: Dec 2011
Reputation:
5
Location: Birmingham
Car Model/Spec: Subaru 20.d, GTi 6, 205 xs
Thanks: 0
Given 3 thank(s) in 3 post(s)
Are either of the td04s ready to bolt on with exhaust side completed aswell?
Vehicle repair and servicing in the midlands pm for details
Current cars
Subaru Impreza 2.0d - Daily
306 1.8 - track whore soon to be GTI6
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
24-03-2014, 12:20 PM
(This post was last modified: 05-04-2014, 10:40 AM by Lwilliams.)
(24-03-2014, 08:09 AM)Piggy Wrote: Any budge on the spacers? Can get set of 4 new with extended bolts for £72
I'm losing money on these already sorry mate "/. These are good quality from speedshack and they also come with the adapters for fitting vortex's/challenger's.
(24-03-2014, 08:53 AM)td_dan Wrote: Are either of the td04s ready to bolt on with exhaust side completed aswell?
The td04 with the braided line was running on carls xud so that will be bolt on don't need an adapter, as the manifold is welded on. Also been clocked etc... but there is no exhaust down pipe as this was sold as a part of the exhaust. You would need to make one of these up or speak to c2k as I think he is doing some.
Posts: 616
Threads: 62
Joined: Jul 2013
Reputation:
1
Location: South Wales
Car Model/Spec: Megane 265 + SHB Gti 6
Thanks: 1
Given 6 thank(s) in 6 post(s)
Bumpy
|
![[Image: sig002_zpscb892e18.jpg]](http://i205.photobucket.com/albums/bb46/Silent_Rider-TP/car/sig002_zpscb892e18.jpg)
![[Image: VcvTtst.jpg]](http://i.imgur.com/VcvTtst.jpg)
![[Image: cornishmafia.jpg]](http://s97.photobucket.com/user/paul7278/media/cornishmafia.jpg.html)