+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: FOR SALE: XUD stuff: TD04, TD04 Adapter... (/showthread.php?tid=21129)
Pages:
1
2
XUD stuff: TD04, TD04 Adapter... - Lwilliams - 05-02-2014
Hi,
Decided to scrap the idea of building a xud as funds won't allow it
. Reason being I already have another project on the go ('6)... Thought it would cost less than it has. So unfortunately this stuff has to go to fund the other project...Not trying make money, just to get it back. This stuff was from c.gerrard and his 173 bhp xud:
Bosch pump, lines and injectors (with wood-ruff key pulley etc..) : £120 SOLD
TDO4: £100 Also has braided line as seen in picture
[attachment=13370][attachment=13371]
Exhaust: £170 NOW SOLD
Fmic: £200 SOLD - core is 450 x 175 x 65 mm and dia of 2.25
[attachment=13375][attachment=13827][attachment=16090]
Manifold: £40 NOW SOLD
Here is the write-up from Carl when I purchased them...
"TDO4 - Welded to the manifold. Wastegate welded shut. No shaft play at all when it went on in April. EGT probe fitted (I'll supply the gauge as well)
FMIC - Everything was new when it went on at the end of September, so that will be fine."
None of the above items have been changed just stored in a garage.
Other items I have for sale:
Td04 - bought around 2 weeks ago, small amount of play : £100 SOLD
[attachment=13616][attachment=13617]
New Arp direct fit bolts - ZXvolcanes group buy: £200 SOLD
Xud engine and box (no turbo) - bought from a guy breaking a 306 on eBay: NOW SOLD
New TD04 adapter plate from zekegti6 for t2 manifold: £30
[attachment=13614]
I will post items at buyer's expense.
Don't really want to come down on prices as this is what I paid for these items.
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - camoturd - 05-02-2014
How much is the fmic and kit or the kit it's self!
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - Dean - 05-02-2014
Does the TD04 that is welded to the manifold come with elbow to match downpipe?
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - Lwilliams - 05-02-2014
(05-02-2014, 08:28 PM)camoturd Wrote: How much is the fmic and kit or the kit it's self!
The FMIC comes with all piping to route to the inlet manifold, that is £200. Not sure what you mean by the kit its self?
(05-02-2014, 08:40 PM)Dean Wrote: Does the TD04 that is welded to the manifold come with elbow to match downpipe?
No sorry mate it was used with the custom 3" exhaust that fits directly on to it.
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - underground375 - 05-02-2014
Send us pictures of the Fmic mate interested
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - Lwilliams - 05-02-2014
(05-02-2014, 08:48 PM)underground375 Wrote: Send us pictures of the Fmic mate interested
Will do as soon as I get home from work tomorrow mate
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - Frosty - 05-02-2014
(05-02-2014, 08:48 PM)underground375 Wrote: Send us pictures of the Fmic mate interested
Theres some pics of it in Carl's project thread
http://306oc.co.uk/forum/thread-3849-page-5.html
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - Tom - 05-02-2014
Someone buy that heroic exhaust!!
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - Paul_13 - 05-02-2014
I'll take inlet manifold. Can you pm me your PayPal please
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - darrenjlobb - 05-02-2014
Pm me a price posted on the Nile skirts
sorry am on phone
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - Lwilliams - 06-02-2014
Engine is now sold...
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - c.gerrard - 06-02-2014
Oi, lazy sod. Do your own write up
Good luck with everything, none of you will be let down with anything for sale here
RE: Xud Parts... FMIC set up, TD04's, 11mm Bosch, Xantia Manifold etc... - Paul_13 - 08-02-2014
Inlet manifold paid for
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, Custom 3" exhaust,... - Mike - 15-02-2014
Exhaust paid for
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, Custom 3" exhaust,... - Slam Wagon - 15-02-2014
Arp studs dont fit a hdi do they?
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, Custom 3" exhaust,... - Lwilliams - 16-02-2014
(15-02-2014, 11:09 PM)PE02KHG Wrote: Arp studs dont fit a hdi do they?
Not sure mate I know there was a thread around with some one asking the question, "/ don't know what the out come was though
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, 15mm Spacers,............. - Lwilliams - 25-02-2014
Added another FMIC picture as requested...
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, 15mm Spacers,............. - zekegti6 - 25-02-2014
Do you have the spacers
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, 15mm Spacers,............. - Piggy - 25-02-2014
ARP studs gone yet?
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, 15mm Spacers,............. - Lwilliams - 26-02-2014
(25-02-2014, 05:50 PM)zekegti6 Wrote: Do you have the spacers
Sorry mate decided to keep the spacers now
(25-02-2014, 05:59 PM)Piggy Wrote: ARP studs gone yet?
Not yet bud
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, TD04 Adaptor,............. - Tom - 01-03-2014
Do you have a GT15 oilo line for sale?
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, TD04 Adaptor,............. - paul7278 - 01-03-2014
Is the td04 a ready to bolt on?
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, TD04 Adaptor,............. - Lwilliams - 02-03-2014
(01-03-2014, 06:43 PM)Tom Wrote: Do you have a GT15 oilo line for sale?
Sorry mate, no GT 15 oil line for sale.
(01-03-2014, 07:51 PM)paul7278 Wrote: Is the td04 a ready to bolt on?
The one with the braided oil line is ready to bolt on, I'm pretty sure it's been clocked etc.
The other turbo is completely standard, although there's a lot less play in the shaft.
The reason why I priced them the same is because the one has a braided line with a fair amount of play (there should be less play when there's oil pressure going through it as that takes up some slack), whereas the other one has no braided line and very little play.
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, TD04 Adaptor,............. - Lwilliams - 10-03-2014
Bumpy (spacers added)
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, TD04 Adaptor,............. - Lwilliams - 15-03-2014
To the top
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, TD04 Adaptor,............. - Lwilliams - 24-03-2014
Update with ARP bolts sold
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, TD04 Adaptor,............. - Piggy - 24-03-2014
Any budge on the spacers? Can get set of 4 new with extended bolts for £72
XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, TD04 Adaptor,............. - td_dan - 24-03-2014
Are either of the td04s ready to bolt on with exhaust side completed aswell?
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc, ARP studs, TD04 Adaptor,............. - Lwilliams - 24-03-2014
(24-03-2014, 08:09 AM)Piggy Wrote: Any budge on the spacers? Can get set of 4 new with extended bolts for £72
I'm losing money on these already sorry mate "/. These are good quality from speedshack and they also come with the adapters for fitting vortex's/challenger's.
(24-03-2014, 08:53 AM)td_dan Wrote: Are either of the td04s ready to bolt on with exhaust side completed aswell?
The td04 with the braided line was running on carls xud so that will be bolt on don't need an adapter, as the manifold is welded on. Also been clocked etc... but there is no exhaust down pipe as this was sold as a part of the exhaust. You would need to make one of these up or speak to c2k as I think he is doing some.
RE: XUD stuff: FMIC set up, TD04's, 11mm gov'd etc...,15mm Spacers, TD04 Adaptor... - Lwilliams - 08-04-2014
Bumpy