Pugloves sigma phase-win

[puglove]

Soo as most of you know now my ph2 DT has meet its untimly death, so it will now be donating to the new sigma DT,

so its a sigma phase win

Purchase run down:

Purchased with 4 months T&T
140k
suspected matrix leak
Beam shagged but the guy didnt know this
interior covered in paint

Its been lowered
ph3 skirts
And assuming its had sports front & Rear bumpers, did 5 door ph1's ever come spec'd with these bumpers????
coded spoiler
£350 bargin

plans:

* Swap out the xud lump for my 82k lump on the sub frame with my gti shocks,ARB, and 266mm's all still attached

*Swap rear beam for my lowered 82k beam with gti ARB

* Add my 38k torsion bars from my gti

*Swap interior from my ph2 complete with dash (prob going to look for some 5 door cloth seats rather than leather) so if any fancy's a swap/P/X i'll consider it

* Tidy exterior up to a OE spec

* Fit straight through exhaust from my old DT, chop side exit off and make it a normal exit again

* experement with wheels lazers/ black clones/ silver clones / challengers

* New set of fogs covered wiith yellow film. ( If any knows of some universal/ non OE ones that fit that look a little better please let me knoe)

* fit bosch to old lump and belt at the same time

* maybe add a ph2 rad and my front mount in the future

Thats about it for now should look quit nice OE ish

NOTE how shagged the rear beam is in the pics below

[Matt]

Rear beam looks fine


Some good plans mate hope it doesn't take to long to get it looking epic

[puglove]

Rear beam looks fine


Some good plans mate hope it doesn't take to long to get it looking epic

hoping to get alot of work done over xmas, the lump isnt a massive issue right now as the current one runs/drives ok just extreamly sluggish

[Jonny81191]

Looking good mate!

[samass]

Camber y0!!

plans look good dude, crack on!

[Seid']

like mate

[Jonny b]

You got to many doors bud lol

[puglove]

Camber y0!!

plans look good dude, crack on!

yeah bro, who need the trailing arm done whe you got f*cked bearings

like mate

cheers dude, home it turns out mint

You got to many doors bud lol

or do you not have enough doors????????



did you go take them pics esprcialy for this lol

[Matt]

Any excuse for jonny to be a whore

[puglove]

He is a whore. period!

[Jonny b]

Iam a whore lol

[sam]

Looks smart dude!

[Tom]

Yes phase one more door sigma friends ftw!!

[Curt]

Yes 5 doors did come with sport bumpers, genuine sport models... XSi and actual Dturbos, not just diesels that people still call Dturbos... as it's a trim level.

Looking and sounding good though, although blatant theft of my "phase win" phrase

[puglove]

Looks smart dude!

Cheers buddy

Yes phase one more door sigma friends ftw!!

Car frwends !!!!!!

Yes 5 doors did come with sport bumpers, genuine sport models... XSi and actual Dturbos, not just diesels that people still call Dturbos... as it's a trim level.

Looking and sounding good though, although blatant theft of my "phase win" phrase

Ahhhhhh but they did do Dturbos in a 5 dr in ph2 very few of them but they did do them maybe this on of them ultra rare ph1 5dr dturbo . Lol nah i think the seats are ph2 xsi spec.


And me see no copyright on "phase-win" so its now mine

[kingy]

i think the lazers look the tits. got me thinking now, i was looking for clones for mine but might go back to lazers. mmmmm

[Frosty]

I'm usually not a massive fan of 5 doors but I think this looks sweet. Must be cuz it's sigma also I think lasers look good on ph1s

[puglove]

i think the lazers look the tits. got me thinking now, i was looking for clones for mine but might go back to lazers. mmmmm

Yeah iv gotta say this does look pretty bad ass on lazers, im going to have a little play with clones and see how that looks, but a squarer front end + squarer wheels = win.

But for the love of god please put clones oon your epic ph3. or even better keep your current wheels. lazers just dont suite the ph3 front end , (see pic below of my mrs xsi)

I'm usually not a massive fan of 5 doors but I think this looks sweet. Must be cuz it's sigma also I think lasers look good on ph1s

I always hated door 306's but my last DT turned me, dont get me wrong 3dr FTW. but since having my last 5 it dosnt bother so buying this one was no hard choice and it looks epic for a door

[kingy]

clones it is then. if you do decied on the lazers give me first dibs on your clones. happies.

[puglove]

Iv onlym got black and green clones at the mo

[c.gerrard]

Lovely colour

[puglove]

Lovely colour

lovely phase for the colour too

[Matt]

"phase win" is a copyrighted registered trade mark of Curtis footman 2012.

Seen the paper work myself



The mrs' xsi needs white handles already!

[puglove]

"phase win" is a copyrighted registered trade mark of Curtis footman 2012.

Seen the paper work myself



The mrs' xsi needs white handles already!

Thats why iv put mine as phase-win , different thing,


And really i wouldnt mention that to her, she fecking hates you because you keep buying all the white door handles, i swear she may kill you when she see's you . if your lucky you may get away with a savage beating!

[Matt]

Hahaha I have a passenger side one, and a drivers side with a thumb print you can have lol

[puglove]

Are they actual bianca?

[Matt]

Passenger is. The drivers is resprayed by me. And was an awesome colour match

[kingy]

B&q by any chance matt.

[puglove]

So iv done a little work on this now


1st job was to wip the beam out of the sigma





Then to wip the one piece exhaust off and the beam out of the 82k DT




82k beam with the gti6 bits in on the sigma



I also put the shagged beam back in ph2 to make it easyer to move it around.

Also noticed the heater matrix had been bypassed so it was defo dead , so out with the dash




Matrix out, suprise suprise it holds water like a colander .




Will go and get a new matrix tomorrow and put it back together

---

Also , my ph2 is a ABS bias valve moddle, and the ph1 was a non ABS non Bias valve moddle had a bit of a pain swapping brake lines about to make the ph2 beam work without a bias valve

[Frosty]

Have you thought about putting the phase 2 dash in? My D turbo has had it done!