Sam's low boost supercharged rallye

[7057sam]

had you not seen his 205 before? its so epic! Might have to give me a heads up with the cyclones!

Yeah ive got a gloss black set and the green ones

Haha he was saying he gets 130 down the back straight of Snetterton

[7057sam]

So got these in the post a few days back





Love black mask another box ticked.

Also got these crork of shit the break aswell.my mum xsi nile basically clutch is very close to going.slips all the time, still driveable just.



I be getting side repeaters , fli trap door speakers, driver side door loom..............oh a cat back jetex



Its 4 years old solid, abit of surface rust nothing some hammerite won't clue

[Tallguy_2]

Jetex mate, nothing but love for mine!

[7057sam]

Jetex mate, nothing but love for mine!

Its so quite on idle but interesting to hear it with a decat be sad to see the scorpion go but think it could be a problem on track and the jetex is free.

So got the blacks on this morning gave the slam panel and bumper so love aswell don't think it will be clean for long though I do plan on spraying it up before pugfest/fcs.

Before ;



After ;



Lights on need to do some cable tiring at some point as the usually bottom mount is gone.







The corner slightly low but I can cable tire the bottom mount to hold it and tire the hockey s in aswell

[Alee83]

Just need some black side reps now mate!! Looks much better with the masks on though...

[ozonehostile]

the all black look is working so well on this

[7057sam]

Just need some black side reps now mate!! Looks much better with the masks on though...

Hell yeah got a spare manifold which will either be polished or gloss black.Also got slme trs tow strap for the front and back and a some rallye stickers for the back and safety devices stickers for the cage.

---

the all black look is working so well on this

Cheers mate yeah lots more black and carbon bits ready for it

[Bennis]

Just lurked your entire thread, good read! Any videos of this car with the Jetex? would love to hear some exhaust vids, drivebys and maybe in car?

[7057sam]

Just lurked your entire thread, good read! Any videos of this car with the Jetex? would love to hear some exhaust vids, drivebys and maybe in car?

Thanks mate, I aim to please

I'll get some at the weekend I don t really wanna get rid of my current exhaust as its soo win

But it need s to be under for trackdays, and the 3k boom its pretty bad.

[Bennis]

Looking forward to it! If you ever end up fitting the jetex, Ide love to hear. I can only find one example on youtube and am really curious to hear how 'quiet' they are!

[7057sam]

Yeah ill get the before's with the scroipen cat back and decat this weekend the xsi going to pug heaven Saturday so get the jetex then it needs the back box tidying and polish though.

[Eeyore]

looks epic! Well done joining the black mask club

[7057sam]

looks epic! Well done joining the black mask club

Cheers sam hopefully do the rr meet and malory next month

Just praying the other 1.2 will balance up ok on friday and we find out what my clutch and lack of brakes problems are comming from.

[7057sam]

Got the t1rs on and balanced



They all balanced up.this one was the worst





Sanded one down complete bastard



Awsome way to never get any over spill

[Eeyore]

silly weights are silly! D: i thought it was meant to be lightweight

Are you actually running spacers on track? D:

[7057sam]

silly weights are silly! D: i thought it was meant to be lightweight

Are you actually running spacers on track? D:

Yeah well they hubcentre ones so pretty sturdy.

Done the primer coat about 20 minutes ago, shitty horrible stuff I never use zinc primer not using it again

[Ben]

I painted my 1.2s the other day and yes they are awful to sand down!

[7057sam]

I painted my 1.2s the other day and yes they are awful to sand down!

Yeah I actually brought a black and decker mouse sander today got lods of 1/120 and 1/180 to test out

I was really surprised with the card trick, works really well.i stupidly brought the wrong primer yesterday.bloody crappy zinc primer, formed way to quick and obviously cracked but basically got it all sorted now found some halfords primer kicking around so that saved the day!

Ben they horrible to clean aswell

[Tallguy_2]

If your doing them yourself make sure you etch prime them otherwise you'll be wasting your time, team dynamics wheels are also arseholes if you want to make a mint job, as they are powdercoated it's really hard to take them back to a decent edge to then blend,

What colour?

[7057sam]

If your doing them yourself make sure you etch prime them otherwise you'll be wasting your time, team dynamics wheels are also arseholes if you want to make a mint job, as they are powdercoated it's really hard to take them back to a decent edge to then blend,

What colour?

Yeah I do usually use good primer, at my girlfriend's atm so no more progress till at least Friday

Doing them in ford graphite grey with pretty of laquer

Also should hear back from some brembo s today.

[7057sam]

So here at picture of the colour I choose.please note I've now cleaned the paint of the tryes

[7057sam]

Got these bad boys in the posted today very excited







Wondering what colour on work in a paint warehouse so been thinking about it all week
Also primered manifold alloy wheels and fuel rail.

[ozonehostile]

your going to have to go upto 16" rims for brembo 4 pots dude, its the whole reason you now have my old 1.2s

[7057sam]

your going to have to go upto 16" rims for brembo 4 pots dude, its the whole reason you now have my old 1.2s

Whatever told that is wrong its a widely know fact that TD 1.2 15's fit over the 406 v6 calipers just search it on 306gti6.com

[ozonehostile]

ah, but im using bigger discs, forgot that bit haha

[7057sam]

ah, but im using bigger discs, forgot that bit haha

What size 305mm? im useing 288 xantia bad boys £14 each

[ozonehostile]

got some tarrox g88 discs, cant remember the size of the top of my head, but certainly bigger than gti6 brakes

[7057sam]

Yeah did you buy from for the 406 v6 then they 305mm I think, so have you got your brembo's yet.

You pocket must of heard after buying them....

[ozonehostile]

Yeah did you buy from for the 406 v6 then they 305mm I think, so have you got your brembo's yet.

You pocket must of heard after buying them....

yeah 406 v6 setup, I don't mind spending when it comes to brakes for obvious reasons lol.

not fitted them yet, but they will be making an appearance on the re-shell very soon
just need to get the braided lines and I should have a pretty awesome brake setup.

you using braided lines on yours?

[7057sam]

Yeah did you buy from for the 406 v6 then they 305mm I think, so have you got your brembo's yet.

You pocket must of heard after buying them....

yeah 406 v6 setup, I don't mind spending when it comes to brakes for obvious reasons lol.

not fitted them yet, but they will be making an appearance on the re-shell very soon
just need to get the braided lines and I should have a pretty awesome brake setup.

you using braided lines on yours?

Yeah got my braided lines ready to go on yeah I've got some money set to the side if the squeling is too bad,fitting them on the 24 th can t wait