Sam's low boost supercharged rallye - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Sam's low boost supercharged rallye (/showthread.php?tid=3660) |
Sam's low boost supercharged rallye - 7057sam - 23-05-2012 Hi guys brought this last nite,had a Accord Type R before was more hassle that it was worth.spend bloody fortune on petrol and oil.Here my previous beast Right this is how i got to complete standard but not for long tho..... :evil: Re: Sam rallye based track project !! - ginge191 - 23-05-2012 standard rallye?! impressive that! not even the slighest of lows! Re: Sam rallye based track project !! - 4WayDiablo - 23-05-2012 VERY sexy rally you have there, im amazed at how many are poping up concidering there was only 100 ever made and approx 40 left at last count Re: Sam rallye based track project !!(whoring pro 1.2 :P)1.2s - 7057sam - 23-05-2012 First thing first what i planned to do: new suspension disc s and pads all round induction kit with cold air feed stainless steel exhaust plus decat bucket seat,dished steering wheel,lost unwanted wait. Got my self some raceland coilovers(really did nt now what to thing of these but pretty good,hard as f#ck tho) Found the beam's torsion bars were seized in so had to lower by notchs,ended up being abit lower that what i wanted(40mm all round)now was about 50mm,but soon to be rebuild as i stands after the lowering Before : After : New disc's and pad god know it needed them Painted calipers up Before: After: Then where Pugfest 11,was awsome(now prepareing for 12) found this picture,ended up doin 7 runs!! Viper induction fitted cleaner manifold fitted My pride The air feed,best bit so far 8-),also done the badge black and tow eye red Re: Sam rallye based track project !! - sam - 23-05-2012 Looks good chap any other plans? Re: Sam rallye based track project !! - 7057sam - 23-05-2012 decide it want to turn it into track slag/daily drive after a track day in this beast Right back to buisness Magnex decat : Ph2 rub primmed and ready to be colour coded: Track slag cyclones,ebay £50 whoop whoop Paint time!!!: Sanded down: Primed: Done them in ford graphite grey here a pic on the car Re: Sam rallye based track project !! - samass - 23-05-2012 lovin this, love rallyes! not hanging about either are ya by any chance, have you fitted the decat yet? if not, would you be able to measure it for me? or the cat, either way, i just need to know the length so i can chop my cat up before i fit the gti manifold to my xsi. cheers man! Re: Sam rallye based track project !! - 7057sam - 23-05-2012 samass Wrote:lovin this, love rallyes! not hanging about either are ya yeah i sold it as i brought a powerflow catback with a decat welded to it. I'm actually further ahead(now in process of sorting out my pictures) Right i got a powerflow cat back plus decat from good friend(jamma)think its 3 inch square(Second pic) not be bad as was a straight swap for my standard system. Diaster strict my sister rear ended to at approx 20mph resulting in this :o Did nt claim but getting fixed as we speak Re: Sam rallye based track project !! - 4WayDiablo - 23-05-2012 Good thing you didn't as they would write that off and we don't want that happening! Re: Sam rallye based track project !! - 7057sam - 23-05-2012 another picture of contrast over standard cyclones an graphite grey Pictures of the wheels done(i now i painted tryes,they were died so did nt bother me ) decide to do a better cleaner manifold before : after Pretty good for half a spray can i had hanging around. Got myself dished omp rep wheel,thinks its 350mm(suade nice and grippy) Also omp boss think booth were £40 of ebay I have nt fitted it yet as need a different torq driver,maybe torq 50 ? MMm another ebay deal been checking ebay daily for seats finally got these 1x cobra monaco 1 x cobra monaco s pretty good condition and near as damn it identical. Omp base mounts for seats sliders for buckets go inbetween seat mount and seat 3 Point sparco harnesses Project weigth loss!! Rear seat gone Cleaned up boot about 15kg loss they maybe more removed centre console an ashtray,and lots of dirt. Also fitted a Ph3 gear knob Lol got rid of the graphite wheels and got some in gloss black.so ill have toyo t1r for track and p6000 for road Seat/harnesses are in the omp would line up so through fuk it and brought all in one seat mounts/sliders from demon tweaks [IMG]http://i305.photobucket.com/albums/nn232/7057sam/2012-05-03135244.jpg[/IMG Re: Sam rallye based track project !! - 7057sam - 24-05-2012 Few pictures after a well deserved clean Re: Sam rallye based track project !! - 7057sam - 24-05-2012 Also got some ph3 lights as seen in picture above. started stripping some more weight off.got rid of rear quarters and selt belts,plastic round the boot and round the wiper.will also be dewipering asap.rekon its aleast 10 kg safed there. Result of a hour or so stripping out Re: Sam rallye based track project !! - Fozzy - 24-05-2012 Love the look of this, always preferred the black rallye to the Cherry Rallye which i have. You planning on fitting a cage at all? Re: Sam rallye based track project !! - Connor - 24-05-2012 Racelands on a Rallye Re: Sam rallye based track project !! - 7057sam - 24-05-2012 Fozzy Wrote:Love the look of this, always preferred the black rallye to the Cherry Rallye which i have. Yeah hopefully.fixed dent now,and just finished rebuilding beam and new rear mounts. Also got to do cultch before pugfest.Hopefully get some track time in Re: Sam rallye based track project !! - 7057sam - 24-05-2012 Connor Wrote:Racelands on a Rallye I now :roll:,but at that point money was tight and i have been running on f*cked beam an beam mounts so see after rebuild what its looking like. my last 6 had koni adjustable on,which were very nice maybe go back to them.I want to go back to shocks i like a little bit of rebound. Re: Sam rallye based track project !! - lewisdmz - 24-05-2012 kind of a shame to see a Rallye being taken apart but ah well. Also p6000's :? Re: Sam rallye based track project !! - 7057sam - 24-05-2012 lewisdmz Wrote:kind of a shame to see a Rallye being taken apart but ah well. Also p6000's :?OH well could change it back it hour or so,lol i love my toyo t1r's so for the time being got to put up wid the p6000 Re: Sam rallye based track project !! - Stephen - 24-05-2012 Lovely car, liking what you've done so far too! Re: Sam rallye based track project !! - 7057sam - 24-05-2012 stephenraymond606 Wrote:Lovely car, liking what you've done so far too! Thanks mate ,lots more to come,getting c ar back sunday Re: Sam rallye based track project !! - sam - 26-05-2012 Any plans for the engine chap? I do like the rallye sits really well Re: Sam rallye based track project !! - 7057sam - 26-05-2012 sam Wrote:Any plans for the engine chap? I do like the rallye sits really well Maybewas thinking along the lines throttle bodies or PT81 cam Re: Sam rallye based track project !! - sam - 26-05-2012 Sounds good pal, would go like a tramp on chips if you do plus can't beat the sound of bodies! Re: Sam rallye based track project !! - 7057sam - 26-05-2012 sam Wrote:Sounds good pal, would go like a tramp on chips if you do plus can't beat the sound of bodies! Yeah sounds is insane.Still sounds sick normal tho,doing the exhaust next weekend.Goin to get small silencer,so get it poping abit more Re: Sam rallye based track project !! - 7057sam - 27-05-2012 Update: Got car back from carls today,very excited Before : After: Very happy,bit of a rubbish picture tho. Secondly Omp wheel and boss finded,taking abit of getting used to. Also boot got resprayed Beam got rebuild an new beam mounts aswell,so running about 40mm,also got the rub stripes colour coded Re: Sam rallye based track project !! - jammapic - 01-06-2012 Just FYI... if you have an accident with those harnesses like that, they will snap your spine in 2. Stay safe, you really need a harness bar or a cage. JP Re: Sam rallye based track project !! - Ed Doe - 01-06-2012 jammapic Wrote:they will snap your spine in 2. Substantiate this. Re: Sam rallye based track project !! - jammapic - 01-06-2012 Ed Doe Wrote:jammapic Wrote:they will snap your spine in 2. Look at the angle they are bolted to the floor!! If you have an accident they will force your body straight down and snap your spine... Re: Sam rallye based track project !! - silverzx - 01-06-2012 Interesting read, looks like your doing some decent bits to it! Re: Sam rallye based track project !! - Ed Doe - 01-06-2012 jammapic Wrote:Look at the angle they are bolted to the floor!! If you have an accident they will force your body straight down and snap your spine... Meh, I would suggest unless you're really tall, the amount you'd get pushed down would be negligble, and in any case if your momentum is forwards you'd move easily without getting 'damaged' too much...? |