24-04-2016, 08:00 AM
Cracking on with starting to strip the engine bay today...
Nipping round a mates to borrow his 110v grinder (it's way, way better than mine...) and then get cracking on stripping stuff. Going to try a different approach on the underseal stuff....that's going to get attacked with thinners and petrol see if that brings it off. It's just such an arse to do with a grinder and brush.....just warms up and smears everywhere....
First job will be get the scuttle panel and wiper arms and motor off. Should then give me access to the loom multiplug soni can remove that. Need to have a look at service box too to figure out how to drop the column to get access to the servo bolts.....
All will stop at 16:15 for a rather important football game!
Nipping round a mates to borrow his 110v grinder (it's way, way better than mine...) and then get cracking on stripping stuff. Going to try a different approach on the underseal stuff....that's going to get attacked with thinners and petrol see if that brings it off. It's just such an arse to do with a grinder and brush.....just warms up and smears everywhere....
First job will be get the scuttle panel and wiper arms and motor off. Should then give me access to the loom multiplug soni can remove that. Need to have a look at service box too to figure out how to drop the column to get access to the servo bolts.....
All will stop at 16:15 for a rather important football game!
Cherry Red Rallye - Full on OEM resto.....