Dr_Jekyll & Mr_Hyde Estate Project

[dr_jekyll]

Well harness bar arrived today (thank you ian slamwagon)
Reallised straight away ive got problems with fitting it. Had overlooked the thickness of the lower rose joint. My plan was to use the lower seatbelt point to anchor the harness bar and for one of the eyelet points. But the eyelets i bought were too short (25mm). Ive now ordered some 50mm eyelets that will give me the extra thread i need.

My next concern was the adjustable point for the top of the seatbelt. This again is another harness bar anchor point but not happy with how ratterly the adjuster is nor the fact it can still be adjusted. Also was after a more oem finish over the way ian fitted it without the covers.
ok so the system i found was alot easier then i thought to lock solid. Basically its just a case of remove the sprung loaded pin and replace it with an m6 and nyloc nut..
Im alot happier with this finish as it looks like it "belongs" in the car rather then looking like a bodged up scaff pole.
So currently waiting for extended eyelets to arrive to get this job done with.

Still havnt finished the internal mbc nor fan setup yet so thats also on the "to do" list

Sent from my SM-G920F using Tapatalk