02-07-2016, 08:44 PM
Won't measure naff all, seriously, the heat inertia of the probe itself barely reads the temperature accurately until ~5 seconds later anyway even when directly in the flow, you'd have been better measuring post turbo than there...
Unless there's actual flow there, you seriously won't measure anything. I'd leave that nice plate and attach a manifold pressure gauge and drill the probe into the manifold properly.
Or if you really can't, put the probe post turbo as close as you can get it.
Unless there's actual flow there, you seriously won't measure anything. I'd leave that nice plate and attach a manifold pressure gauge and drill the probe into the manifold properly.
Or if you really can't, put the probe post turbo as close as you can get it.