Dr_Jekyll & Mr_Hyde Estate Project

[dr_jekyll]

Quick update,
Ordered the r70 fuel pump and 1.6fps today.
Turbo arrived the other day, was a little concerned by the amount of side to side play it appeared to have but been told not to worry about it.
406 manifold also arrived today so offered the manifold up to it with the adapter.

So first glance i can see that im going to need to drill a hole in the manifold.
Looking at it im thinking that the studs will need to be removed from the manifold in order to run nut and bolts because of clearance issues. This will also require some grinding....

Anyway as for the exhaust atm it seems like i will have to go from the turbo straight to a 45°. This is because the turbo exhaust exit points directly at the bulkhead. unlike the stock turbo the exhaust mount isnt conical and is just a flat plate so a flexi is gonna be needed aswell.