Dr_Jekyll & Mr_Hyde Estate Project

[dr_jekyll]

My other 306 started dying so bringing this on the road was pushed forward, to get it throught the mot it just needed an exhaust so I sourced a decat pipe, straight through middle section and just a stock backbox.
[attachment=15148]
After passing the mot I got straight to work on making the car ready for a stage 1 whippy remap. First thing was to remove the egr valve, to my luck the back bolt was missing it was only a matter of removing and fitting the blanking plate (and mase a homade gasket for the inlet to solve the boost leak)
[attachment=15149]
[attachment=15150]
[attachment=15151]
To finish the car off for a stage 1 I also removed the oil breather from the inlet pipe and replaced it on the rocker cover with an ash filter and fitted my old k&n from my hdi hatch back.
[attachment=15152]
once my kwp 2000 was delivered the fun started remaping the little jem. Took half an hour just to get the program working on the laptop but as soon as it was on it was a 5 minute job to upload the whippy map
[attachment=15153]
after the remap a few weeks later the lift pump decided to start shitting itself, cutting out unpredictably, refusing to prime in the mornings and the famous gold fillings in the bottom of the fuel filter. Before it could get worse I ordered a new fuel filter and another genuine vdo pump.
[attachment=15154]