08-04-2014, 09:52 PM
Looking soo good mate! Can wait to see this rip up jimbos smug face
![Wink Wink](https://www.306oc.co.uk/forum/images/smilies/wink.png)
FCS prep phase win sigma gearbox mounted
|
08-04-2014, 09:52 PM
Looking soo good mate! Can wait to see this rip up jimbos smug face
![]()
I hope it's pretty fast when done just got to get it all finished and then set up but to be fair jimbos is pretty rapid
Another thing I have been doing is trying to sort the inside out gauge etc Been playing with the emp as well ![]() ![]() This goes to a brake pipe end threaded into the manifold acting as a heat sink
09-04-2014, 06:36 AM
Looks great so far man
Current stable
'09 Mercedes E320cdi wagon '99 306 gti6
09-04-2014, 06:59 AM
Thanks getting there slowly things just taking time only like 8 weeks till fcs so should be k lol
13-04-2014, 12:07 PM
13-04-2014, 02:04 PM
Good progress, but is that some kind of badass dagger in your boot?!
Disclaimer: The above is not to be taken to heart and is probably a joke, grow up you big girl.
![]()
13-04-2014, 05:32 PM
13-04-2014, 05:34 PM
Wiring knife?!
Thats a bayonet!!! haha ![]() Member of the 99% warning or you're nothing club 2000 Moonstone 1.8 Meridian - Sold 2000 China 3dr XS - Dead 1998 Diablo 3dr XSI
20-04-2014, 09:23 PM
21-04-2014, 08:57 PM
Exhaust looks win mate, wish i hadnt sold mine now
Cant be far off now surely ![]() ![]()
22-04-2014, 06:22 AM
Thanks chap yep getting there started to put slam pannel back and tried to for intercooler but it's far to big so a new one on the way
22-04-2014, 07:15 AM
You manage to get a smaller twin pass intercooler?
22-04-2014, 11:27 AM
she's coming along nicely chief!
22-04-2014, 12:30 PM
Managed to get another intercooler mr frost not a twin pass but should work ok just got to wait for bits to turn up then should be nearly fin mark
Right getting close to fcs do fort I better get me arse in gear got a fiat few bits done need to get a list of bits left going hope to have every thing sorted pretty soon getting excited for the first test drive now
![]() Had few issues with my massive twin pass so went for this ![]() ![]() ![]() Got me bonnet on as well and every thing misses witch is good lol And spent bit of time sorting all my gauges and moving radio ![]()
30-04-2014, 07:14 AM
Look pretty epic mike! Keep up the good work. Can't be far off now
![]()
30-04-2014, 07:45 AM
Christ that is some pipe routing, what went wrong with the twin pass?
You gone for 2 1/4 or 2 1/2? mines still at 2 inch pipe, not sure where the limitations are on ic piping, conflicting info out there. turbo is in a nice position, loving the v band on the downpipe too, wish I'd gone for one of those! (30-04-2014, 07:45 AM)zx_volcane Wrote: Christ that is some pipe routing, what went wrong with the twin pass? The twin pass I had was way to big think it the Biggest one they do on eBay I am using 2.5 piping not sure Meself if it will make much difference and the V band I thort would make it easier to adjust my down pipe and the merc turbo uses a v band so had half on the turbo it's 3 inch out of the turbo and then I have reduced it down to 2.5 hope To c how it goes in a few weeks or Less (30-04-2014, 02:42 PM)Tom Wrote: Oooooooo looks so cool!! Thanks tom hope it goes as well as it looks
30-04-2014, 04:23 PM
Was the same intercooler as I'm running I think, only just got mine behind the bumper!
30-04-2014, 05:21 PM
Also lol at the cutlass in the boot! Wiring knife my arse
![]()
Doesnt even own a 306.
(30-04-2014, 05:21 PM)Tom Wrote: Also lol at the cutlass in the boot! Wiring knife my arse Yep it's a little big never leaves the garage (30-04-2014, 04:23 PM)zx_volcane Wrote: Was the same intercooler as I'm running I think, only just got mine behind the bumper! The one I had including the inlets was 40 inches long not sure if there is any more room on a zx but didn't want to chop me bumper to much yours seams to fit pretty well looking forward to seeing it a fcs
01-05-2014, 11:33 AM
07-05-2014, 08:51 PM
Haven't done much to it really just been doing things like getting gearbox oil and drive shaft nuts had a bit of time so I thort I would see why it used to surge a bit checked fuel filter and that was all fine so I removed the fuel strainer from the tank and found this think this was my problem lol bit dirty
![]() ![]() Cleaned it all ok so the fuel should flow good again now
07-05-2014, 09:14 PM
crikey, what the heck is all that rubbish in there?
08-05-2014, 06:06 AM
08-05-2014, 06:14 AM
I had the red flakes when I cleaned my old ph1 out...weird.
Looking fapping epic fella ![]() Wishes for more power...
08-05-2014, 06:36 AM
That pipe route looks great, may have to change the route I'm going as I've got major clearance issues with the phase 1 bumper.
That strainer is probably the worst one I've seen yet haha
Current stable
'09 Mercedes E320cdi wagon '99 306 gti6 (08-05-2014, 06:14 AM)Piggy Wrote: I had the red flakes when I cleaned my old ph1 out...weird. Yep the red flakes bit strange as you had them as well and thanks it's all getting a bit tight under there now (08-05-2014, 06:36 AM)ozonehostile Wrote: That pipe route looks great, may have to change the route I'm going as I've got major clearance issues with the phase 1 bumper. Yep the strainer was pretty bad and I done he pipe work like that cus didn't want to cut the bumper to much and I liked washer bottle lol |
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Gearbox mounted turbo - manifold | darrencurry0808 | 0 | 1,332 |
22-01-2020, 08:57 PM Last Post: darrencurry0808 |
|
![]() |
Ph1 Estate. Gearbox mounted vnt | ash23 | 439 | 145,596 |
24-06-2015, 08:26 PM Last Post: welshpug |
Sigma 96 phase 1 306 gti 6 | SKoob | 76 | 27,221 |
10-02-2015, 06:42 PM Last Post: Frosty |