rear brake bias replacement

[zx_volcane]

Ok so my zx has rear discs and uses two inline pressure reducers on the rear hardlines - no load compensator.

These are no longer available, or stupidly hard to find / expensive.

Suggestions for replacement?

I'm thinking either using a brake bias valve up near the MC and running new hardlines to rear from one port with a T piece - note would remove diagonal split in system.

Or using a load compensator - maybe just tied up out the way so it doesn't move.


Any suggestions for either?

and for aftermarket brake bias valves?


thanks

[welshpug]

same as a late 205/309 so readily available not too expensive.

[zx_volcane]

   

service box says NFP

part number 1

GSF which I have bought from in past don't seem to stock any longer, or ECP

---

same as a late 205/309 so readily available not too expensive.

[welshpug]

been nfp for about 15 years lol.

try mr auto.

---

or a bosch stockist, got mine from one for the zx 16v. shorts auto electrical in cardiff.

will probably need to find the bosch reference number first.