rear brake bias replacement - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19) +--- Thread: rear brake bias replacement (/showthread.php?tid=34984) |
rear brake bias replacement - zx_volcane - 10-10-2016 Ok so my zx has rear discs and uses two inline pressure reducers on the rear hardlines - no load compensator. These are no longer available, or stupidly hard to find / expensive. Suggestions for replacement? I'm thinking either using a brake bias valve up near the MC and running new hardlines to rear from one port with a T piece - note would remove diagonal split in system. Or using a load compensator - maybe just tied up out the way so it doesn't move. Any suggestions for either? and for aftermarket brake bias valves? thanks RE: rear brake bias replacement - welshpug - 10-10-2016 same as a late 205/309 so readily available not too expensive. RE: rear brake bias replacement - zx_volcane - 10-10-2016 service box says NFP part number 1 GSF which I have bought from in past don't seem to stock any longer, or ECP (10-10-2016, 10:24 AM)welshpug Wrote: same as a late 205/309 so readily available not too expensive. RE: rear brake bias replacement - welshpug - 10-10-2016 been nfp for about 15 years lol. try mr auto. or a bosch stockist, got mine from one for the zx 16v. shorts auto electrical in cardiff. will probably need to find the bosch reference number first. |