306 HDi Brakes (266mm) replacement parts

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
306 HDi Brakes (266mm) replacement parts
#1
I have some brakes from a 306 2.0 HDI (266mm) fitted to my Citroen AX, I think they are the Lucus ones.

Anyway one of the bolts has sheared off that attaches to the yolk (see picture below), can I get these bolts separately somewhere?

[Image: QBpvZQZ.jpg]
Reply
Thanks given by:
#2
do they come with a new pads set??
Reply
Thanks given by:
#3
You get one ready-threadlocked with a set of new Pagid pads, can't say for other brands. But yeah they're available separately. Smile
Reply
Thanks given by:
#4
that will have snapped off in the slider, my concern would be why it was possible as the slider should be free to turn once the bolt is cracked off, so you might have a bit more to contend with.

good news is you can get slider kits from most motorfactors or places like brakeparts international.
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
#5
(02-10-2015, 10:15 AM)welshpug Wrote: that will have snapped off in the slider, my concern would be why it was possible as the slider should be free to turn once the bolt is cracked off,  so you might have a bit more to contend with.

good news is you can get slider kits from most motorfactors or places like brakeparts international.

Got a new impact gun and thought it was a good idea to tighten it using the gun  Nospeak
Reply
Thanks given by:
#6
you tit!

pull the slider out, might be lucky and be able to wind the remains out by hand, its just a high tensile M8 bolt.
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
#7
Take it you didn't check torque settings first? Those bolts are surprisingly 'loose' lol.
Reply
Thanks given by:
#8
Is this everything I need:

http://www.ebay.co.uk/itm/PEUGEOT-306-93...4d30ba4f46
Reply
Thanks given by:
#9
Yeah that's it. Smile
Reply
Thanks given by:
#10
Thanks Guys
Reply
Thanks given by:
#11
Oh, and maybe a torque wrench for next time... Wink
Reply
Thanks given by:
#12
(02-10-2015, 11:07 AM)Toms306 Wrote: Oh, and maybe a torque wrench for next time... Wink

What is the torque setting?
Reply
Thanks given by:
#13
No idea. I nip mine with a spanner. Never once had an issue. You must be superman
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Reply
Thanks given by:
#14
35 Nm or 26 lbs/ft for the slider bolts.

(02-10-2015, 11:27 AM)bashbarnard Wrote: No idea. I nip mine with a spanner. Never once had an issue. You must be superman

He used an impact gun! lol
Reply
Thanks given by:
#15
Could have just went to the scrappy and saved yourself a few quid, thats what I do for bolts and stuff like that Smile
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Best 266mm Calipers/Brakes MY95 11 1,949 19-09-2015, 08:40 AM
Last Post: MY95
  266mm brakes under volcane wheels Chris_90 6 1,797 29-04-2015, 11:38 AM
Last Post: welshpug
  23mm Master Cylinder with 266mm Brakes MY95 18 5,394 16-04-2015, 01:42 PM
Last Post: MY95

Forum Jump:


Users browsing this thread: 5 Guest(s)