+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: 306 HDi Brakes (266mm) replacement parts (/showthread.php?tid=32089)
306 HDi Brakes (266mm) replacement parts - hpi_matrix - 02-10-2015
I have some brakes from a 306 2.0 HDI (266mm) fitted to my Citroen AX, I think they are the Lucus ones.
Anyway one of the bolts has sheared off that attaches to the yolk (see picture below), can I get these bolts separately somewhere?
![[Image: QBpvZQZ.jpg]](http://i.imgur.com/QBpvZQZ.jpg)
RE: 306 HDi Brakes (266mm) replacement parts - pug306driver - 02-10-2015
do they come with a new pads set??
RE: 306 HDi Brakes (266mm) replacement parts - Toms306 - 02-10-2015
You get one ready-threadlocked with a set of new Pagid pads, can't say for other brands. But yeah they're available separately.
RE: 306 HDi Brakes (266mm) replacement parts - welshpug - 02-10-2015
that will have snapped off in the slider, my concern would be why it was possible as the slider should be free to turn once the bolt is cracked off, so you might have a bit more to contend with.
good news is you can get slider kits from most motorfactors or places like brakeparts international.
RE: 306 HDi Brakes (266mm) replacement parts - hpi_matrix - 02-10-2015
(02-10-2015, 10:15 AM)welshpug Wrote: that will have snapped off in the slider, my concern would be why it was possible as the slider should be free to turn once the bolt is cracked off, so you might have a bit more to contend with.
good news is you can get slider kits from most motorfactors or places like brakeparts international.
Got a new impact gun and thought it was a good idea to tighten it using the gun
RE: 306 HDi Brakes (266mm) replacement parts - welshpug - 02-10-2015
you tit!
pull the slider out, might be lucky and be able to wind the remains out by hand, its just a high tensile M8 bolt.
RE: 306 HDi Brakes (266mm) replacement parts - Toms306 - 02-10-2015
Take it you didn't check torque settings first? Those bolts are surprisingly 'loose' lol.
RE: 306 HDi Brakes (266mm) replacement parts - hpi_matrix - 02-10-2015
Is this everything I need:
http://www.ebay.co.uk/itm/PEUGEOT-306-93-01-LUCAS-266mm-VENTED-FRONT-BRAKE-CALIPER-SLIDER-PINS-BCF1364Q-/331529998150?fits=Model%3A306&hash=item4d30ba4f46
RE: 306 HDi Brakes (266mm) replacement parts - Toms306 - 02-10-2015
Yeah that's it.
RE: 306 HDi Brakes (266mm) replacement parts - hpi_matrix - 02-10-2015
Thanks Guys
RE: 306 HDi Brakes (266mm) replacement parts - Toms306 - 02-10-2015
Oh, and maybe a torque wrench for next time...
RE: 306 HDi Brakes (266mm) replacement parts - hpi_matrix - 02-10-2015
(02-10-2015, 11:07 AM)Toms306 Wrote: Oh, and maybe a torque wrench for next time...
What is the torque setting?
RE: 306 HDi Brakes (266mm) replacement parts - bashbarnard - 02-10-2015
No idea. I nip mine with a spanner. Never once had an issue. You must be superman
RE: 306 HDi Brakes (266mm) replacement parts - Toms306 - 02-10-2015
35 Nm or 26 lbs/ft for the slider bolts.
(02-10-2015, 11:27 AM)bashbarnard Wrote: No idea. I nip mine with a spanner. Never once had an issue. You must be superman
He used an impact gun!
RE: 306 HDi Brakes (266mm) replacement parts - MY95 - 02-10-2015
Could have just went to the scrappy and saved yourself a few quid, thats what I do for bolts and stuff like that