New car

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New car
#1
Well as the times come to break my beloved 306 after having them on and off for 5 years I thought I was time to move on so I've purchased this....


[Image: image_zps2975795e.jpg]

Smile
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#2
Looks pretty good, wheels are horrible though lol
Reply
Thanks given by:
#3
Yea not my cup of tea really bit rip speed special looking for some m3 wheels after winter
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#4
Should have a "BMW content" warning in the title Tongue

Looks nice though mate, but i agree witht he wheels looking a bit on the ripspeed side! lol
[Image: P1060836_zpsz3xgxt7q.jpg]
Reply
Thanks given by:
#5
(14-11-2013, 06:50 PM)WiNgNuTz Wrote: Should have a "BMW content" warning in the title Tongue

I think it'd be more appropriate for there to be "306 warning" in titles nowadays Wink
Reply
Thanks given by:
#6
Looks like a straight enough one, m3 kit with either motorsports or sunflowers and itd look very well
Reply
Thanks given by:
#7
Where would the fun be in that wingnutz

Them wheels have brand new tyres on the rears but I don't think they will last too long /becauserwd
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#8
personnally not a fan, especially after seeing pics of your pug but looks tidy for what it is mate
Reply
Thanks given by:
#9
I know of a set of gen e46 m3 rims with no Tyres freshly refurbed in black sat in a living room
Doing nowt!

Oh yeh nice car! Engine??
[Image: SDC10442-1.jpg]
Reply
Thanks given by:
#10
At least its not a megane lol
Reply
Thanks given by:
#11
Ooooh nice. As said above, what engine?

I've already run the numbers and, if all goes to plan, in the spring time I'll be looking at getting hold of an E46 330i. Touring, obviously. Big Grin
[Image: MIRKxNP.jpg]
Reply
Thanks given by:
#12
Pretty win but I preferred your 306. 323 right?
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
Reply
Thanks given by:
#13
I hope its a 325..! ninja
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#14
(15-11-2013, 10:49 AM)THE_Liam Wrote: Pretty win but I preferred your 306. 323 right?

yep . . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#15
It's a 323i coupe 2.5 straight 6 around 170 Bhp standard.

My cousins owned it for years and at the age of 14 (now 21) said one day i will own it came up for sale boom bought it, I know there is more powerful bigger engines ect ect but I've always wanted this particular car.

Pm coming jonny
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#16
To be fair the 323's get a lot of a stick but even the 318's are perfectly driftable (if thats your thing) so the 323 should cope fine.
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#17
Not too bothered about drifting, not yet anyway

Expected to get loads of stick posting up this thread tbh lol
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#18
(15-11-2013, 12:20 PM)Danny2009 Wrote: Not too bothered about drifting, not yet anyway

It'll come with time... Accidental or not.
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#19
Just looking forward to driving it and getting used to it, think when I've got that covered arse end will be coming out lol
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#20
(15-11-2013, 12:39 PM)Danny2009 Wrote: Just looking forward to driving it and getting used to it, think when I've got that covered arse end will be coming out lol

If its even slightly wet it'll catch you out no doubt.

LSD or open diff?
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#21
Don't think it's had anything done to it apart from lowered and them wheels so guess it's a standard diff
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#22
(15-11-2013, 12:59 PM)Danny2009 Wrote: Don't think it's had anything done to it apart from lowered and them wheels so guess it's a standard diff

Inside wheel spin! spin! spin! spin! Blush
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#23
Mmmm...

http://youtu.be/BKrP6ayykmo

http://youtu.be/ey3EIbv9kf4
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#24
The 323 and the 325 have the same engine, it's the inlet manifold which is the main difference between them, put on a 2.5 M50 inlet manifold and you'll be nearer 185hp for less than £100, more can be gained if you then get a decent zorst and a map to suit, then you'll be around 200hp
[Image: Ty8kl7b.jpg]
Reply
Thanks given by:
#25
Don't do that! Putting ideas in my head already priced a turbo kit up lol

Yea I've head about the swap over 200 would be nice Smile
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#26
Turbo power is the only way! Big Grin
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#27
Best get saving then ehh!
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#28
Straight 6 turbo is p0rn tbf.
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#29
Finally! Lol looks nice bud! What you gonna be driving when the bad weather comes? Tongue
[Image: attachment.php?aid=9919]
Reply
Thanks given by:
#30
(15-11-2013, 01:15 PM)silverzx Wrote:
(15-11-2013, 12:59 PM)Danny2009 Wrote: Don't think it's had anything done to it apart from lowered and them wheels so guess it's a standard diff

Inside wheel spin! spin! spin! spin! Blush

Not if the diff has a wee date with mr mig lol

Screw straight turbo'ing it drop an m3 evo lump into her then either turbo or slight mods been in a evo with few mods done and it can fairly shift let me tell you!!
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)