Posts: 2,105
Threads: 170
Joined: Dec 2011
Reputation:
5
Location: west yorkshire
Car Model/Spec: xud 1.9 dturbo
Thanks: 2
Given 0 thank(s) in 0 post(s)
hi guys the gf has been out in the car today and now the window wont close. there is a break in the loom witch i have tapped up. the light on the switch comes on but it wont move and its starting to rain. can anyone advice me on how to close it. dont fancy the window been open all night. cheers guys
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died
Moonstone hdi stage 2
Posts: 2,560
Threads: 87
Joined: Dec 2011
Reputation:
31
Thanks: 0
Given 1 thank(s) in 1 post(s)
Bloody women.
Try using a knife or a gun, should fix the root of the problem quickly and easily.
HTH.
Posts: 330
Threads: 18
Joined: Dec 2011
Reputation:
2
Location: Fermanagh, N.Ireland
Car Model/Spec: '95 xld .. Boosted!
Thanks: 0
Given 0 thank(s) in 0 post(s)
Door card off and run a +ve and -ve directly to the motor, then leave the motor unplugged till ya get it sorted!
Gov modded 11mm Bosch + Standard turbo = 137.2bhp . . . . TD04 now in...time to get playing!
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58
Location: Eastleigh
Car Model/Spec: S16 and HDi daily
Thanks: 2
Given 29 thank(s) in 28 post(s)
failing that, if the motor's buggered, take the winder off the motor (just 3 screws IIRC) and turn it manually with long nose pliers.
Welding and fabrication projects undertaken, contact me for more information.
Posts: 2,105
Threads: 170
Joined: Dec 2011
Reputation:
5
Location: west yorkshire
Car Model/Spec: xud 1.9 dturbo
Thanks: 2
Given 0 thank(s) in 0 post(s)
(17-09-2012, 05:43 PM)Harky Wrote: Door card off and run a +ve and -ve directly to the motor, then leave the motor unplugged till ya get it sorted!
you mean run a wire from the battery to the motor and it will go up?. what if the motor has gone is there a chance it can shut?. cheers
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died
Moonstone hdi stage 2
Posts: 330
Threads: 18
Joined: Dec 2011
Reputation:
2
Location: Fermanagh, N.Ireland
Car Model/Spec: '95 xld .. Boosted!
Thanks: 0
Given 0 thank(s) in 0 post(s)
Aye, just pull door card off, and if you have a multimeter you'll probably find a 12v somewhere at the switches, run a wire from there direct to the motor, or if you have a spare battery you can just run it from there. If the motors buggered then do as Jonny suggests.
When you try to move the window can you hear anything happening?
Hopefully you can't in which case it will just be the motor, or more likely just the door loom wiring. Bare in mind that the door loom on the drivers side also affects the passenger side, ie a brake drivers side can stop passenger side from working!
Gov modded 11mm Bosch + Standard turbo = 137.2bhp . . . . TD04 now in...time to get playing!
Posts: 2,105
Threads: 170
Joined: Dec 2011
Reputation:
5
Location: west yorkshire
Car Model/Spec: xud 1.9 dturbo
Thanks: 2
Given 0 thank(s) in 0 post(s)
done it. took the motor out then the end bit and got a torx screw driver and wound it up . take take a while.
the passenger side is totally shot and has been for a while. the wires are black and the connector was shot. passengere window did work but was abit crap. going to find another motor and loom. cheers for the help guys
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died
Moonstone hdi stage 2