02-10-2014, 12:47 PM
Guys I really am at a loss here. Ive done so much research into this and got the right sleeve nuts and washers etc and got the spring top caps. Everything has now arrived but i just dont see how these top mounts are adjustable at all.
As you can see in this picture below you can see that 3 of the holes do line up with the original holes. Brilliant! Two of the three arent threaded which is also very annoying... but my main problem is how are these at all adjustable? If you rotate them you have to redrill at least 2 holes!
![[Image: IMG-20141002-WA0002_zpsl9f0adta.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG-20141002-WA0002_zpsl9f0adta.jpg)
Am I going mad or are these just a stupid design and Compbrake should just sell the 205 ones as 306 ones! You can see there are threaded holes all the way round so you can actually rotate the mounts in order to adjust!
![[Image: cmb0239_2.jpg]](http://www.compbrake.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/c/m/cmb0239_2.jpg)
As you can see in this picture below you can see that 3 of the holes do line up with the original holes. Brilliant! Two of the three arent threaded which is also very annoying... but my main problem is how are these at all adjustable? If you rotate them you have to redrill at least 2 holes!
Am I going mad or are these just a stupid design and Compbrake should just sell the 205 ones as 306 ones! You can see there are threaded holes all the way round so you can actually rotate the mounts in order to adjust!