29-05-2012, 08:47 PM
1. repair the floor pan first with 1 piece of metal, wont be as weak as using bits here and there.
2. then make up a piece of chassis leg by bending the metal and folding it around a piece of wood or similar, so its in the shape of the chassis leg .
3. put new piece over the hole, plug weld it to new floor plate you put on.
4. stitch weld it to the original chassis leg where you have had the grinder down to shiny metal
5. spray aerosol of hammerite/waxoil or commas cavity wax and drown the b----stard till its dripping out all over you !!!
2. then make up a piece of chassis leg by bending the metal and folding it around a piece of wood or similar, so its in the shape of the chassis leg .
3. put new piece over the hole, plug weld it to new floor plate you put on.
4. stitch weld it to the original chassis leg where you have had the grinder down to shiny metal
5. spray aerosol of hammerite/waxoil or commas cavity wax and drown the b----stard till its dripping out all over you !!!
