27-03-2017, 01:51 PM
(27-03-2017, 12:44 PM)Frosty Wrote: As others have said it is certainly worth changing all the seals and washers etc when taking the beam apart if the bearing etc are all ok. Only issue you will find it that buying from peugeot you''ll have to buy them in bags and that can be 4s/5s or sometime 10s. I do have a few seals etc so if you do want any give me a shout.
I tend to use either an xud head bolt or front brake carrier bolt to get the anti roll bar plates off. That bolt you're struggling to get out can usually be bit of a pain especially when the beam has been lowered.
Wheres abouts are you to as im pretty much on the somerset border?
10 minutes from Glastonbury, if you have spares I'll happily take them off your hands (buy them of course) makes it easier than trying to source them all myself
I've bought a bolt (M12x1.5 as said above) to wind it out I don't think the beams been lowered, although I couldn't tell you as it's the only beam I've seen so have no point of reference ahah