Ok so the Ecu arrived today, plugged it in, same fault. So happy it's not the Ecu. Managed to get hold of a decent wiring diagram, so started from the beginning.
Turns out that the feed wire coming from the multi relay on pin 4 was broken after it splits from the manifold heater, chopped out the bad piece and soldiered a new piece in. Fired it up and she sat there burbling away at 950 rpm.
On with the project.
Took it for a play round the yard, will upload a video later.
Turns out that the feed wire coming from the multi relay on pin 4 was broken after it splits from the manifold heater, chopped out the bad piece and soldiered a new piece in. Fired it up and she sat there burbling away at 950 rpm.
On with the project.
Took it for a play round the yard, will upload a video later.