20-01-2015, 10:15 PM
So the plastic that the centre caps are made of is pretty brittle. Im ordering them one at a time as I suspected I would run into problems. Ive updated the design which took most of this evening. Its much easier making things from scratch than trying to edit little bits of 3D off!
So now its back to the original 4 legs and I have moved them all in by 0.5mm which means there should be another mm of play so they should fit properly. Also Ive rounded a few more corners from the legs and made them a bit steeper so they should fit easier... Another £18 a a two week wait and I should have V2 on my door step!
![[Image: Capture3_zps50c8d9c1.png]](http://i1184.photobucket.com/albums/z327/srowell3/Capture3_zps50c8d9c1.png)
So now its back to the original 4 legs and I have moved them all in by 0.5mm which means there should be another mm of play so they should fit properly. Also Ive rounded a few more corners from the legs and made them a bit steeper so they should fit easier... Another £18 a a two week wait and I should have V2 on my door step!