01-03-2014, 08:15 AM
Been a while since I put much on here a few things have happend
Had to mock my engine back together so I can start on my manifold so I know were the gear linkages go bloody things so I started collecting exhaust bits and got to work with the plasma cutter and the welder
![[Image: EC5CC625-1B95-41A1-98FB-6CDF50E3A0EE_zps7x73kguh.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/EC5CC625-1B95-41A1-98FB-6CDF50E3A0EE_zps7x73kguh.jpg)
Made it breath a bit bigger as the t2 manifold hole is a bit small
Then I made a mid steel plate same size welded that on with dismiler rods so I can mig the 90 on nice and proper
![[Image: 90A7D5F6-3BB9-426F-B31D-AA81421F5562_zpsdyvnwq3a.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/90A7D5F6-3BB9-426F-B31D-AA81421F5562_zpsdyvnwq3a.jpg)
After this I made up all the rest of the system wasn't to bad bit of a pain with the pipe coming out the back of the head got a bit technical with the broom stick to hold the turbo while mocking up
![[Image: 88829A61-B5CC-4ECD-B9CF-DE5FA2550E6B_zpsecepsjvn.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/88829A61-B5CC-4ECD-B9CF-DE5FA2550E6B_zpsecepsjvn.jpg)
Then removed engine again so I can make up all the mounts for the gearbox and turbo
![[Image: 09518984-4AED-4619-887A-BCD2B3B8EE40_zpsygqwiakw.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/09518984-4AED-4619-887A-BCD2B3B8EE40_zpsygqwiakw.jpg)
![[Image: 9B4612F9-8CD7-4760-A394-1BD2129E7F52_zpsni0hb95z.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/9B4612F9-8CD7-4760-A394-1BD2129E7F52_zpsni0hb95z.jpg)
![[Image: 75BC7016-3D65-46B8-8B8E-9280F98A84F1_zpscsbelnp5.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/75BC7016-3D65-46B8-8B8E-9280F98A84F1_zpscsbelnp5.jpg)
Now time to take it all apart and put me rods in as we are doing jimbos HDi to xud conversion next week then things will start going together not always coming apart ?
Had to mock my engine back together so I can start on my manifold so I know were the gear linkages go bloody things so I started collecting exhaust bits and got to work with the plasma cutter and the welder
![[Image: EC5CC625-1B95-41A1-98FB-6CDF50E3A0EE_zps7x73kguh.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/EC5CC625-1B95-41A1-98FB-6CDF50E3A0EE_zps7x73kguh.jpg)
Made it breath a bit bigger as the t2 manifold hole is a bit small
Then I made a mid steel plate same size welded that on with dismiler rods so I can mig the 90 on nice and proper
![[Image: 90A7D5F6-3BB9-426F-B31D-AA81421F5562_zpsdyvnwq3a.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/90A7D5F6-3BB9-426F-B31D-AA81421F5562_zpsdyvnwq3a.jpg)
After this I made up all the rest of the system wasn't to bad bit of a pain with the pipe coming out the back of the head got a bit technical with the broom stick to hold the turbo while mocking up
![[Image: 88829A61-B5CC-4ECD-B9CF-DE5FA2550E6B_zpsecepsjvn.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/88829A61-B5CC-4ECD-B9CF-DE5FA2550E6B_zpsecepsjvn.jpg)
Then removed engine again so I can make up all the mounts for the gearbox and turbo
![[Image: 09518984-4AED-4619-887A-BCD2B3B8EE40_zpsygqwiakw.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/09518984-4AED-4619-887A-BCD2B3B8EE40_zpsygqwiakw.jpg)
![[Image: 9B4612F9-8CD7-4760-A394-1BD2129E7F52_zpsni0hb95z.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/9B4612F9-8CD7-4760-A394-1BD2129E7F52_zpsni0hb95z.jpg)
![[Image: 75BC7016-3D65-46B8-8B8E-9280F98A84F1_zpscsbelnp5.jpg]](http://i852.photobucket.com/albums/ab86/mikebaker345/75BC7016-3D65-46B8-8B8E-9280F98A84F1_zpscsbelnp5.jpg)
Now time to take it all apart and put me rods in as we are doing jimbos HDi to xud conversion next week then things will start going together not always coming apart ?