06-11-2013, 10:31 PM
took the old piston rings off no problems!
measured them and they are 1.5/1.5/3mm
decided to check the big end bearings with a micrometer could only get an imperial one so had to convert the reading!
the micrometer is a 1" to 2" size
so the reading is
1.9...50+18 = 1.968" which works out to 49.987mm =standard bearings
measured them and they are 1.5/1.5/3mm
decided to check the big end bearings with a micrometer could only get an imperial one so had to convert the reading!
the micrometer is a 1" to 2" size
so the reading is
1.9...50+18 = 1.968" which works out to 49.987mm =standard bearings