23-09-2013, 04:32 PM
taken readings with a compresion tester, using a socket on the pulley bolt and hand turning it over
cylinder 1. 4.5bar
cylinder 2. 4.5bar
cylinder 3. 6bar
cylinder 4. 8 bar
have now decided to take the head off the block to see if the valves are bent or have burned seats
i have taken the rocker covers off and the cams look good and clean no scoring but the cover bolts were a bitch to remove
cylinder 1. 4.5bar
cylinder 2. 4.5bar
cylinder 3. 6bar
cylinder 4. 8 bar
have now decided to take the head off the block to see if the valves are bent or have burned seats
i have taken the rocker covers off and the cams look good and clean no scoring but the cover bolts were a bitch to remove