Clutch alignment tool

[DeeTurbo]

Hi,

The one I got didn't fit the car when I had it a part.

I was wondering which ones you lot use?

[Toms306]

I use a Valeo one, came free with one of the clutches I did.

[powerandtorque]

I cut the input shaft off a dead gearbox and put a handle on the end

[tigerstyle]

Bought a universal draper tool, never used it in the end and just got lucky getting the gearbox on!

[bashbarnard]

I use old input shafts, tools and most of the time of ive got bothing that fits line it up by eye with a 1/2 or 3/8 extension

[C2K]

I used a deep 1/2 socket last time iirc, or the clutch tool that came in my gti6 valeo kit.

[Frosty]

As some have said i use on the 306s the 1 that comes in with a valeo clutch. Shame not really any other makes do them and for the different cars as well.

[cully]

valeo blue thing that came with the kit

[DeeTurbo]

I use a Valeo one, came free with one of the clutches I did.

My Valeo kit didn't come with one

I cut the input shaft off a dead gearbox and put a handle on the end

I was thinking about this last night,

Bought a universal draper tool, never used it in the end and just got lucky getting the gearbox on!

I'm now thinking that the way I do it with a deep 3/8" socket isn't the best.

Is the alignment tool only to centralise the clutch plate to allow the input shaft to locate or does it actually centralise the plate for when it's in use?

By this I mean if the plate isn't smack in the middle will the plate spin on the piss?

I'm thinking when you press the clutch the pressure plate releases and the clutch plate will be floating, is that right?

[tigerstyle]

Clutch is always centered on the gearbox splines?

[Paul_13]

Cut off input shaft

[rocker8742]

Snapped off broom handle last time lol


Sent from my iPhone using Tapatalk

[BiG K]

Peugeot's Tool