Nialls supercharged GTi6 - project tidy up

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Nialls supercharged GTi6 - project tidy up
Right, got new plugs in and picked up a new coil pack from Jonny123675892473. Got that fitted and whilst i was there did a bit of investigation work and found very weak earths.

[attachment=20529]
With engine idling

[attachment=20530]
With engine off. 
I would expect to see 0.05ohm ish when everything's off so not happy with that. The earth strap its self to the battery is very poor so I've ordered all the bits to redo that and add a few extras. After that, ill go for a bloody long drive with the logging on and see what happens! Also got a new CPS on the way.
Over christmas I'm hoping to have a day of getting a few bits sorted then can enjoy it again. Just need some new brake discs now as well Sad
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
Nearly there. Think I'd of just used universal earth cables from the motor factors though rather than ordering something.
Reply
Thanks given by:
(07-12-2014, 07:27 PM)Dum-Dum Wrote: Nearly there. Think I'd of just used universal earth cables from the motor factors though rather than ordering something.

It cost me 15 quid delivered which is enough to redo the bay and add the extras i want so I'm not fussed. Can have them all at the correct length then as well
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
Right well i got my earths replaced. Before i was doing a voltage drop test on this and getting about 1.5v between the head and battery. After the new earths, i now get 0.01v so i can live with that lol
Took the car for a longish drive and seemed spot on so i hope thats it now.
Now to just start using the bloody thing again! lol
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
Are you still selling it?
JP
Reply
Thanks given by:
Yeah after show season. Moving means i won't have space for 3 cars Sad
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
You'll regret it Niall...you know you will
Wishes for more power...
Reply
Thanks given by:
I will you're right but tbh ill have no choice. Im going to enjoy it this summer, get to as many shows as possible and give it a damn good thrashing then sell it. If we find a place we can keep 3 cars then it will stay but the chances are doubtful. If i can move away from London i should be able to but thats dependant on work!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
Rent a garage?!
Wishes for more power...
Reply
Thanks given by:
Dude to rent a standard single car garage with no electric or water around here is like £150 a month. Then another £50 a month insurance (wouldn't trust leaving it in a garage uninsured). Its £200 a month just gone before even putting fuel in the car. Seems a waste when I'm paying for another car as well!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
Wouldn't it be easier to try and sell before show season? It'd be like selling a mx5 in the middle of winter
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
(22-12-2014, 07:27 AM)lolsteve Wrote: Wouldn't it be easier to try and sell before show season? It'd be like selling a mx5 in the middle of winter

If i was really trying to sell it then yeah but i want to enjoy it first! Im in no rush to sell it after show season but it will need to go.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
Definitely got to get down to a few more combe action days and give this thing a good thrashing before you sell it.

Or do a whole day somewhere so can pick and choose when to go out.
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
It will be going out at spring action day Wink
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
really a action day of all track days! full of wannabe idiots! shall i hunt for some pannels for you now? haha Wink
Reply
Thanks given by:
scrap it and sell me the charger kit.

man maths nd all that Tongue
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
I may just end up breaking it up and selling it as a standard car so you may be in luck there Matt Wink
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
Well chop chop! i wanted mine boosted this year Sad dont make me endure another 12 months of tedious N/A bwarps when i should be relishing in 'charger whine!
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
Update!
The car has been in sort of an unofficial hibernation since September last year. I could probably count on one hand the amount of times its been used since then however now the days are getting longer and we are rapidly approaching spring, its time to get it ready to abuse again! (Possibly for the last time in my ownership Sad )
So, to start. Ive had a really bad braking vibration with the new brakes on. The old discs were warped and i had them skimmed but they had some pretty bad chill spots so it didnt really help. Being Renault brakes on a Peugeot, they are custom rotors and bells which aren't cheap! Thankfully, i found a few people who also needed new discs and we managed to get 3 sets for £200 a pair plus £13 for new rotor bolts. The discs on their own should of been a shade under £300 a set so i call that a good success!

[attachment=21735]

These will be fitted next weekend with any luck (depending on how hanging i am from a party Friday night lol ) and if i can get use of my mates workshop, i also need to;
Change the lower engine mount
"Modify" lower brace with a hammer as its hitting the sump
Find clunk from N/S/F suspension on heavy acceleration and braking
Find squeak at rear
fit and map ICV as cold idle right now isn't great
fit and map launch control just for lols and many pops and bangs!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
coming on well! did it start up ok for you?
Reply
Thanks given by:
i dont understand why your having cold start issues, ive just removed mine for good and it starts and idles from cold fine. Ill send you my ALS settings as ive nearly got it right. Your squeek at the rear is clearly a beam fault Tongue
Reply
Thanks given by:
You making it for the 11.15 session then niall?
Reply
Thanks given by:
Finally got a chance to get some work done on the car! It was only changing the discs. Wanted a day on it really but we decided to go to a small local car meet this morning and look at some old classics and mental american stuff :p
The car was pretty undriveable tbh with the old discs and its now like driving a bentley in comparison! Also managed to give the callipers a wipe over to get rid of the brake dust. You can actually see them again!

[attachment=21911]

[attachment=21912]

[attachment=21913]

[attachment=21914]

At the moment, just sitting down messing about with my map. Got to add voltage correction as this was never done when the car was mapped. They ran out of time unfortunately and offered for me to go back but sod a 40 mile drive for 5 minutes work lol. Also adding Launch control (well, ALS used as a very primitive form of launch control and will be adding full throttle gear shift soon Wink
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
how do the 4 pot brakes stop you over the standard stuff? as a mate of mine had these on his 306. He said they were a bit of a faff to fit on.
Reply
Thanks given by:
They stop very very well. Just ask Adam when he took it for a drive and literally stuck him self into the windscreen when approaching stationary cars a bit quick lol
They are a bastard to fit. Mine literally have 1mm clearance between the wheel and calliper and i had to grind off the raised Renault logo. Other 16s give more clearance than Turinis though.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
(01-03-2015, 06:08 PM)Niall Wrote: They stop very very well. Just ask Adam when he took it for a drive and literally stuck him self into the windscreen when approaching stationary cars a bit quick lol


I can vouch for the fact they stop well. I think I still have "airbag" and the logo, embedded in my forehead.


(01-03-2015, 06:08 PM)Niall Wrote: They are a bastard to fit. Mine literally have 1mm clearance between the wheel and calliper and i had to grind off the raised Renault logo. Other 16s give more clearance than Turinis though.

Did you now mate? Wink
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
[Image: IMG_1539_zpsr1lllbmh.jpg]
Reply
Thanks given by:
lol
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
Looks broken again...
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
He's saying "I think a m90 will fit here" lmao
90' 205 gti6 supercharged
05' Evo 9 IX GT

Team eaton.


Axle rebuilds please contact me for your needs.

https://www.facebook.com/axlesbystef/
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Matts Cherry HDi Dturbo. Project Stage 1+ & tidy up. Matt-Rallye 29 14,615 10-05-2017, 12:49 PM
Last Post: Poodle
  Matts £200 Cherry Rallye shell rebuild & tidy up project. Xsara goodies landed! Matt-Rallye 70 36,282 07-03-2017, 12:58 PM
Last Post: Matt-Rallye
  Moonstone GTi6 Track-Lite Project reese 28 15,852 29-01-2017, 09:34 AM
Last Post: reese

Forum Jump:


Users browsing this thread: 10 Guest(s)