Ph1 Estate. Gearbox mounted vnt

[mcglynn]

Manifold plate or something? For you to drill/weld your tubes to?

[ash23]

so after viewing a pug van and the chassis rails being rotton i thought i best fix the 306. the plan was if the van was decent enough was break the estate and scrap the rest and stick the gt22 on the van but as said thats nit happened. its safe for a little longer anyway so i replaced ever seal in the pump as veg killed the one to the lda housing thanks to darren for the tips on that one gave it a wash stuck some poorboys nattys wax on epic stuff that really happy with the results and also finally put the twin optics in i can officially say im back in love with it even more so ive sacked the veg off that stuff really killed the performance it was unreal . any way couple piks with the twins fitted


[attachment=19661]



[attachment=19662]


[attachment=19663]

[Chris_90]

Looks shit should have been scraped

Trololololol

Bring on the big boost!

[ash23]

LOL ok cheese wedge

[Chris_90]

LOL ok cheese wedge

[Piggy]

They look ace, some gentle yellow tint on the fogs and it would look spot on imo!

So glad you not given up

[ash23]

They look ace, some gentle yellow tint on the fogs and it would look spot on imo!

So glad you not given up

cheers mate as you prob know they look a whole lot better in person also got some yellow fly eyes coming to

[jayspug86]

enjoyable read that

[ash23]

yellow fogs opinions please


[attachment=19686]

[Piggy]

Looks ace!

Needs yellow calipers or something similar

---

(didnt know you were disabled Ash, such a shame)

[silverzx]

I'd disagree and say don't go too lairy and paint callipers yellow. Fogs is enough.

[Chris_90]

(didnt know you were disabled Ash, such a shame)

[ash23]

Looks ace!

Needs yellow calipers or something similar

---

(didnt know you were disabled Ash, such a shame)

nooooo silver stealthy calipers will do

and something must be up since i came back to a 306
for the record tho since im preaty much my own boss i get to park were i want

I'd disagree and say don't go too lairy and paint callipers yellow. Fogs is enough.

THIS... yellow fogs and light is enough

[ozonehostile]

Glad those lights are finally having some use aha

think they spent about 3 years sat in my garage and f*ck knows how long before that in somebody else s shed

[ash23]

haha there awsome lights the difference from standard one to these is awesome i can actually see when its dark rather than the candle light of the old ones

[ash23]

not much is really happening recently the flanges for the manifold are done just need to find time to pick them up then i can start on that again.

at the weekend i threw some tint on the rear windows im happy with it there is some marks where the glass is scratched so couldn't do much about that but for the purpose i need them for it will be fine.

[attachment=19891]

[ash23]

well since i borrowed a bottle of welding gas for a few days thought i better make good use of it so had anotger bash at the manifold around welding a 306 rear arch and some other bits for people.its nearly there now

[attachment=20045]

[attachment=20046]

[attachment=20047]

[attachment=20048]

[attachment=20049]

[attachment=20050]

[attachment=20051]

[Piggy]

That tubing is HUGE!?!!

[ash23]

its not that big it's the same as the stock mani holes . be fine to do the job needed.

[306Dan]

That manifold looks lovely, out of interest how much did the flanges set you back?

[ash23]

a little bit lol there a good amount but worth ut for something that fits straight on

[bashbarnard]

Loving the mani. Looks awesome. Sort of want to make one for mine. Ive got a spare engine to mock it up on too

[Chris_90]

That is looking mint! Should polish it up be a shame to wrap it up and hide it!

[ozonehostile]

Fair play for putting the work into that manifold, really looking the part dude

[zx_volcane]

Great work on the manifold, bet you can't wait to get it in the car now. Have you made the primaries equal?

[eskimogod]

That looks awesome some inspiration for when I start mine! migging stainless or got a tig hidden there?

[ash23]

Loving the mani. Looks awesome. Sort of want to make one for mine. Ive got a spare engine to mock it up on too

thanks mate id fully recommend having a go it not as hard as you think lol

That is looking mint! Should polish it up be a shame to wrap it up and hide it!

i may not fit it prob sell it when all the hard work is done

Fair play for putting the work into that manifold, really looking the part dude

cheers mate its not as much work as you would imagine most hassle is making sure the cuts are right.

Great work on the manifold, bet you can't wait to get it in the car now. Have you made the primaries equal?

cant wait at all hopefully be on soon there as equal as possible with how i wanted to do things i could have copied darrens old one but thats no fun.

That looks awesome some inspiration for when I start mine! migging stainless or got a tig hidden there?

cheers dude got both there's a tig hidden under a sheet as its new didnt want it getting covered in shit.

[ash23]

so after 15k i thought id better change the oil /service it

changed the cheap air filter for a ram air foam one seems to be less restrictive tbh

[attachment=20101]

also mounted the turbo to the manifold

[attachment=20102]



306 3" down pipe 2.5 system straight through: http://youtu.be/JkVVVdvyjgw

[hbomb1905]

Spotted at Sherwood Pines on Friday - wasn't in the Rallye typically.
Car sounded awesome - heard it before I saw it

[ash23]

haha everyone says that cant sneek up on anyone thats for sure
what was you in id have noticed the rallye