Posts: 3,984
Threads: 138
Joined: Dec 2011
Reputation:
72
Location: Milford, Surrey
Car Model/Spec: Mincebus
Thanks: 0
Given 0 thank(s) in 0 post(s)
Righto guys
I'm needing to replace my discs. Now I've always thought discs are irrelevant to a large extent, as anything less than a few hundred quid would ultimately warp and crack anyway...
So my last 2 sets of brembo discs (@£80 or so a pair) have cracked and warped over the ~10k I've used each set.
I'm slightly questioning the point of spending that on another set when I can buy a pair of Pagid discs for £37ish off ecp, with probably the same result eventually!
Does anyone have any info/opinions on other discs. I dont necesssarily mind spending more if they don't die so quickly!
Cheers in advance
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-
6 - SOLD!
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58
Location: Eastleigh
Car Model/Spec: S16 and HDi daily
Thanks: 2
Given 29 thank(s) in 28 post(s)
Standard mintex ones. As you say, either that or go spend lots and lots on really decent ones.
Welding and fabrication projects undertaken, contact me for more information.
Posts: 3,524
Threads: 178
Joined: Jun 2012
Reputation:
28
Location: Odiham/Basingstoke/W-s-M
Car Model/Spec: HDi!
Thanks: 0
Given 1 thank(s) in 1 post(s)
Ive always been told to treat the disks as the expendable part and get decent pads...
cheap disks and decent pads (Y)
Posts: 198
Threads: 30
Joined: Dec 2012
Reputation:
1
Location: Wirral
Car Model/Spec: 01 HDI Estate
Thanks: 2
Given 0 thank(s) in 0 post(s)
I've got Pagid discs and pads all round and so far am pretty pleased with them, they've been on about 4-5k and no problems at all, need to replace the rears again soon but that's due to the calipers being seized on and cooking the discs and pads but got new calipers and although they were thoroughly cooked they haven't warped or anything I just want to replace them for my own peace of mind and to make sure they wear more evenly.
Posts: 4,135
Threads: 78
Joined: Dec 2011
Reputation:
49
Location: Chichester
Thanks: 0
Given 0 thank(s) in 0 post(s)
I've got the boggo Mintex ones all round on mine (have done for about a year, since its' MOT) and can't fault them. Although I won't be anywhere near as hard on them as you...
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Pagid. Very cheap with forum discount and they are very good for a budget brake!
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
I rate the mintex pads and discs. I replaced the first set because they were warped but they lasted long enough for the price of them.
Posts: 3,984
Threads: 138
Joined: Dec 2011
Reputation:
72
Location: Milford, Surrey
Car Model/Spec: Mincebus
Thanks: 0
Given 0 thank(s) in 0 post(s)
Righto, I'll be getting the Pagid ones it seems! Cheers all
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-
6 - SOLD!
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Posts: 1,847
Threads: 56
Joined: Feb 2012
Reputation:
19
Location: Chesterfield
Car Model/Spec: Moonstone HDi
Thanks: 0
Given 0 thank(s) in 0 post(s)
Mintex and pagid are virtually the same iirc.
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
not really what 100% relevent to topic. but..... iv got budget drilled and grooved from (will link late) and iv given them loads of stick over the last 2 1/2 years on both gti's with no warp / cracking and minimal lipping. i think they are epic for the money.
not really rating brembo these days. i used to get brembos from GSF £18 quid a side so cheapo ones and they would struggle to do 5k of commuting with a little ragging on the weekends and that was on a Dt with a OE MC
Member of 99% warning or your nothing club!
Posts: 1,441
Threads: 48
Joined: Dec 2011
Reputation:
5
Location: Woodstock, Oxford
Car Model/Spec: Peugeot 306 S16 Cossack
Thanks: 9
Given 2 thank(s) in 2 post(s)
Pagid
Peugeot 206 GTI HDI
Volvo V50 2.0d
Volvo XC90 D5
Posts: 3,467
Threads: 186
Joined: Mar 2012
Reputation:
38
Location: Manchester
Car Model/Spec: MG ZR VVC
Thanks: 3
Given 21 thank(s) in 19 post(s)
For the rears though would Eicher be alright you think for general day use?
Posts: 1,441
Threads: 48
Joined: Dec 2011
Reputation:
5
Location: Woodstock, Oxford
Car Model/Spec: Peugeot 306 S16 Cossack
Thanks: 9
Given 2 thank(s) in 2 post(s)
But CP4L have codes.....
Peugeot 206 GTI HDI
Volvo V50 2.0d
Volvo XC90 D5