Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
27-09-2014, 12:59 PM
(This post was last modified: 27-09-2014, 01:06 PM by Jamieh2013.)
Ph2/3 bianca white d turbo
97 r reg I have picked up off a friend yesterday at a very reasonable price.
It already has a bosch pump and td04 fitted - pump needs messing around with as it's not set up right.
It's also had ph3 bumpers fitted and has been lowered onto black cyclones.
Luckily the shell is a really clean shell with no major dents and scratches etc.
Took it for mot this morning and unfortunately it failed on the drivers Balljoint, but could of been worse
Plans for now are to just give it a good clean up and change the Balljoint to get it tested and on the road, once it's tested there's a few other bits I want to get done with it -
Fit my challengers - being refurbed over the next couple of days
Lower the axle abit more as it's too high compared to front
Put some bosch injectors in as it's only got Lucas on at the minute!
Change the d seal on top mount as it's leaking boost
Fit strut brace
Have a mess around with pump and turn fuel up
Fit my ph3 headlights with hid's
Get some side skirts
Get some decent half leathers for it
Here are are a couple of pics while I was at the mot station this morning
Will be more pics and updates to follow
.....
......
Posts: 391
Threads: 66
Joined: May 2014
Reputation:
0
Location: Hayle/cornwall
Car Model/Spec: 306 hdi Dturbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
Love white 306's got any front end pics? Set of crystals and hdi/gti6 skirts and it'll look even sweeter
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
Doesnt look all that bad!
I'd bet those lucas injectors arent helping the running of it!
Needs a ph3 boot and some white handles imho!
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
27-09-2014, 04:04 PM
(This post was last modified: 27-09-2014, 04:10 PM by Jamieh2013.)
(27-09-2014, 03:36 PM)thebluepearl Wrote: Love white 306's got any front end pics? Set of crystals and hdi/gti6 skirts and it'll look even sweeter
Thanks bud, yeah got some crystals with my hid's to put in it mate will get them in tommorow. I haven't took anymore pics of it yet purely because it's scruff. needs a really good clean but there will be lots of pics to follow
(27-09-2014, 03:57 PM)Piggy Wrote: Doesnt look all that bad!
I'd bet those lucas injectors arent helping the running of it!
Needs a ph3 boot and some white handles imho!
Yeah it's a really clean shell, it just smokes loads and doesn't go anywhere tbh lol, it's also got a lovely beast leak though. But it only wants a d seal. Got some bosch injectors to go in aswell.
Yeah needs a ph3 boot, it's in massive need of some side skirts aswell, getting my challengers refurbed in grey aswell which should be done in a few days so I can take the black cyclones off
Then I've got colour coded mirrors and door handles to go on aswell as the crystal headlights.
But first things first it needs a good polish up once it's mot'd
Posts: 391
Threads: 66
Joined: May 2014
Reputation:
0
Location: Hayle/cornwall
Car Model/Spec: 306 hdi Dturbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
Sounds like this will look awesome im not a great fan of decals but I would be tempted to stick the rallye decals on this make it a rallye rep
Posts: 216
Threads: 15
Joined: Oct 2013
Reputation:
0
Thanks: 0
Given 2 thank(s) in 2 post(s)
Looks nice! Some good plans to!
Posts: 1,924
Threads: 86
Joined: Dec 2011
Reputation:
2
Thanks: 0
Given 1 thank(s) in 1 post(s)
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
Thanks guys, it will get there
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
03-10-2014, 04:14 PM
(This post was last modified: 03-10-2014, 04:16 PM by Jamieh2013.)
Got it tested today and gave it a quick wash
Also put my ph3 headlights and colour coded mirrors in while I was it..
Will be giving it a really good polish up tommorow and putting my challengers on aswell, then get the front bumper repainted
Sorry for the poor quality pictures!
......
......
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
11-10-2014, 06:31 PM
(This post was last modified: 11-10-2014, 06:35 PM by Jamieh2013.)
So today I was going to set about having a mess about with the fuel pump until I noticed the fuel pump bracket was snapped and there was a silly amount of movement, so I started to take the pump off
And this is what I found once the pump was off... It was split right upto where the end of my thumb is! Also the belt was running off on the pump with there being so much movement.
But on a plus note it's all sorted now
And the challengers are now on which has improved the look of the car hell of a lot
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
Ouch
Disaster avoided there..
Does it go a bit better now with bosch injectors and no boost leaks!?!
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
(11-10-2014, 07:09 PM)Piggy Wrote: Ouch
Disaster avoided there..
Does it go a bit better now with bosch injectors and no boost leaks!?! :lol:
Yeah to be honest it pulls loads better + there's no smoke at all really now, still leaking boost on the hose off the turbo to the cooler, think the jubilee is knackered as It looks like pipes moved up slightly
But yeah all in all a success even with a slight leak off the pipe, it pulls loads better, still need to turn fuel up abit though as it's only boosting 22psi at minute. But I'll get the leak sorted tommorow first and have a mess around with it again
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
Sort the boost leaks first.
Better jubilee and some fairy liquid on the hose!
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
I've got a few new boost clamps kicking about somewhere think I'll just put one of those on haha
Posts: 1,220
Threads: 90
Joined: Jul 2013
Reputation:
7
Location: The south, Birmingham or somewhere
Car Model/Spec: 306 Gti6
Thanks: 7
Given 2 thank(s) in 2 post(s)
Ooooo a bianca !!
Free hangover cures!
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
Yup haha. My bianca sedan will be getting scrapped this week aswell
Posts: 36
Threads: 4
Joined: Oct 2014
Location: Derbyshire
Car Model/Spec: 306 HDI
Thanks: 0
Given 0 thank(s) in 0 post(s)
Really like this
Posts: 4,926
Threads: 266
Joined: Dec 2011
Reputation:
18
Location: Somerset
Car Model/Spec: 205 DTurbo
Thanks: 73
Given 7 thank(s) in 7 post(s)
Welcome to the cracked bracket club.
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
13-10-2014, 10:42 AM
(This post was last modified: 13-10-2014, 10:42 AM by Jamieh2013.)
(13-10-2014, 08:59 AM)silverzx Wrote: Welcome to the cracked bracket club.
Haha glad I noticed when I did to be honest just need a better turbo now
Posts: 457
Threads: 55
Joined: Oct 2012
Reputation:
1
Location: close to fareham
Thanks: 0
Given 0 thank(s) in 0 post(s)
looks tidy that
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
14-10-2014, 05:02 PM
(This post was last modified: 14-10-2014, 05:05 PM by Jamieh2013.)
On the road as of today, just need to give it a really good polish up now. Get the front bumper painted. Put the colour coded door handles on... And maybe lower rear abit more
......
......
Posts: 5,847
Threads: 169
Joined: Dec 2011
Reputation:
91
Location: South London
Car Model/Spec: 2003 Jaguar S-Type Sport 3.0V6
Thanks: 1
Given 1 thank(s) in 1 post(s)
Car looks awesome mate!
You got plans to black-mask it? That could look pretty mean!
Member of the 99% warning or you're nothing club
2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
Thanks grant, it's a very clean shell tbh... Barring the scuff on corner of bumper, but you can't have it all for what I paid
I've bought some black halos off londondan on here... Will put those in and see what they look like when they arrive, Not sure if I'll like them or not so I plan to black mask the lights that's currently fitted now.
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
18-10-2014, 04:36 PM
(This post was last modified: 18-10-2014, 04:37 PM by Jamieh2013.)
Lights are now in.. Dunno if I like them though :/
.....
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
Car is possibly for sale now if anyone's interested? Will be putting a thread up soon
Posts: 1,833
Threads: 91
Joined: Dec 2011
Reputation:
12
Location: Wrexham
Car Model/Spec: 306 D Turbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
Gota love a white 3dr 306. You can't sell now mate, you'll regret it. Although how much are you after? Lol
Supercharged XUD Project - Dead
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
(31-10-2014, 11:33 AM)londondan86 Wrote: Gota love a white 3dr 306. You can't sell now mate, you'll regret it. Although how much are you after? Lol
Don't know what it's worth :/ it's done 168k on shell. But engines mint, it's got all new rear beam bushes, new shockers on back, new balljoints, new cv boots. New droplinks, new front brake discs and pads, new glowplugs last month, alternator a year ago, Cambelt kit and aux tensioner and belt about 12k ago. And shell barring corner of front bumper is really clean
Posts: 1,833
Threads: 91
Joined: Dec 2011
Reputation:
12
Location: Wrexham
Car Model/Spec: 306 D Turbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
31-10-2014, 11:51 AM
(This post was last modified: 31-10-2014, 11:51 AM by londondan86.)
Sure you won't have a problem selling it mate. I can't be buying any more as tempting as it is to have a white 3dr and a black 3dr
When you do have a price let me know anyway though! Lol
Supercharged XUD Project - Dead
Posts: 211
Threads: 42
Joined: Jan 2014
Reputation:
2
Thanks: 0
Given 0 thank(s) in 0 post(s)
(31-10-2014, 11:51 AM)londondan86 Wrote: Sure you won't have a problem selling it mate. I can't be buying any more as tempting as it is to have a white 3dr and a black 3dr
When you do have a price let me know anyway though! Lol
That's ok, we'll do a swap - my white one for your black one haha
Posts: 128
Threads: 16
Joined: Jul 2014
Reputation:
1
Thanks: 2
Given 1 thank(s) in 1 post(s)
Awesome looking car! The 17s really suit it
|