Ell Diablo - Hydraulic Clutch In

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ell Diablo - Hydraulic Clutch In
#31
Himself i should think, don't make fun of the poor boy, he's obviously delirious.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#32
So....

What a weekend. Working on the car non stop saturday and sunday. Good though as got all stuff done for the MOT and some.

Got the refurbished and lowered rear beam on. Was a right ballache as the piece of shit, bollox designed fucktard of a PH2 rear beam had the load compensator on. So had to swap all the brake lines over onto the new beam with the compensator. Chewed up a fair bit of time, but done now Smile

Got the '6 Brakes fitted, just need a tad more bedding in now, and fixed the blow in the worst

Next on the list is the decat exhaust, fit my plasma dials, finish stripping the front (remove front carpets, cut dash down etc), fit aero catches and then see what money is left next month

[Image: image-2_zps2d429ae3.jpg]

[Image: image-2_zps6b53ed70.jpg]

Excuse this crappy last pic, was late and raining

Sits a lot better now me thinks
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#33
Nicely done dude keeping the xsi lump.or going back to a 1.8?
[Image: fe6eddc8-1731-4100-a5fe-1edb853a88b6_zpseeacf928.jpg]
Reply
Thanks given by:
#34
Nah probably going 1.8 again. XSI lump is so damn heavy it ruins the balance of the car. Horrendous understeer Sad
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#35
Nice, good reason to be honest still going the turbo route?
[Image: fe6eddc8-1731-4100-a5fe-1edb853a88b6_zpseeacf928.jpg]
Reply
Thanks given by:
#36
Looking good chap, aiming to get it on track?
Now only a has been!!

www.autorite-sport.co.uk
Reply
Thanks given by:
#37
Bit late to the party on the subject but the girlfriend is now even more convinced about the sexual connotations of owning a Diablo after reading this thread!!!
Reply
Thanks given by:
#38
Time I probably updated this really.

Its fully stripped at the rear now, only a spare wheel, dash and seats remain.

And.....

Since my last update where it wasnt too much different to this:

[Image: IMG_1714_zps2c0ae466.jpg]


ninja


[Image: IMG_2149_zpsadeccf43.jpg]
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#39
No way! BMW frozen grey?!?! You fugging hero!
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6-6 - SOLD! Sad
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Reply
Thanks given by:
#40
What? You've wrapped a wing?

Cool story bro!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#41
Wrapped? Pussy.

I want to see rattle cans.
[Image: signature_zps1a02ba79.jpg]
Reply
Thanks given by:
#42
Yeah, only did a wing, gonna do the roof and doors next

[Image: IMG_2151_zpsad1c4c44.jpg]

Ordered some of these, MK3 golf wheel arch trims:

[Image: %24T2eC16JHJHoE9n3Kd6utBQ0loBhl+Q~~60_12.JPG]

Some smoked side repeaters too, and gonna paint the bump strips black to match the wheel arches...
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#43
Really need to get some sill trims on there as well. You dont realise how much of a difference it makes until you see one without them!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#44
They're down the garden waiting to get wrapped Smile Looks wank without...
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#45
Sweeeeeet!

Also needs a phase 3 bumper *cough* *cough* Wink
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Reply
Thanks given by:
#46
Is that in your back garden still? Avec splitter? x
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#47
It is indeed, probably growing things on it by now haha, I've still got your old rear bumper too lolz
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Reply
Thanks given by:
#48
That looks awesome dude, can't wait to see the finished product.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#49
looking good babe
Reply
Thanks given by:
#50
Interesting project, look forward to seeing the golf arch trims on there. Are you doing the wrapping yourself?
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#51
(22-12-2012, 03:07 PM)Grant Wrote: Yes, its a ph 2.5 diablo, which will inevitably see me gay, falling over, smashing my face into pavements and wearing inappropriate footwear, but im just glad to be back in a 306 Smile

What's a phase 2.5?
NO SMOKE NO POKEBig Grin
Reply
Thanks given by:
#52
(04-04-2013, 08:49 PM)Aaron _d95 Wrote:
(22-12-2012, 03:07 PM)Grant Wrote: Yes, its a ph 2.5 diablo, which will inevitably see me gay, falling over, smashing my face into pavements and wearing inappropriate footwear, but im just glad to be back in a 306 Smile

What's a phase 2.5?

Half way inbetween a ph2 and ph3 Big Grin

Nah seriously....its basically a ph2 with the odd ph3 thing on it.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#53
(04-04-2013, 08:52 PM)Niall Wrote:
(04-04-2013, 08:49 PM)Aaron _d95 Wrote:
(22-12-2012, 03:07 PM)Grant Wrote: Yes, its a ph 2.5 diablo, which will inevitably see me gay, falling over, smashing my face into pavements and wearing inappropriate footwear, but im just glad to be back in a 306 Smile

What's a phase 2.5?

Half way inbetween a ph2 and ph3 Big Grin

Nah seriously....its basically a ph2 with the odd ph3 thing on it.

Such as. Factory added extras that are also on phase 3 or extras added on by the owner
NO SMOKE NO POKEBig Grin
Reply
Thanks given by:
#54
Late ph2s were called ph2.5s because of some of the things they came out the facotry with. E.g boot has a sealess window and doesnt have that strip along the bottom.There is some other stuff but i cant remember what lol
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#55
(04-04-2013, 09:01 PM)Niall Wrote: Late ph2s were called ph2.5s because of some of the things they came out the facotry with. E.g boot has a sealess window and doesnt have that strip along the bottom.There is some other stuff but i cant remember what lol

Right I get you now. Is that why the dturbo S came with phase 2 front bumpers and phase 3 front bumpers. One more question do you know if the d turbo s was only made in 98 on a s plate because all the ones I've seen and gone to view are a s plate or is this a coincidence
NO SMOKE NO POKEBig Grin
Reply
Thanks given by:
#56
(04-04-2013, 09:05 PM)Aaron _d95 Wrote:
(04-04-2013, 09:01 PM)Niall Wrote: Late ph2s were called ph2.5s because of some of the things they came out the facotry with. E.g boot has a sealess window and doesnt have that strip along the bottom.There is some other stuff but i cant remember what lol

Right I get you now. Is that why the dturbo S came with phase 2 front bumpers and phase 3 front bumpers. One more question do you know if the d turbo s was only made in 98 on a s plate because all the ones I've seen and gone to view are a s plate or is this a coincidence

They also done a DTurbo s in ph1. Usually an n reg
Came in either sigma or some weird green

Not sure on what you mean about the ph2/3 bumpers as you said front lol

Also back on topic that grey is really nice grant! You didn't spray that did you?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#57
(04-04-2013, 06:24 AM)Poodle Wrote: That looks awesome dude, can't wait to see the finished product.

Cheers man. Nether can I, seems a long way off haha

(04-04-2013, 08:31 AM)Dum-Dum Wrote: looking good babe

Cheers sweetcheeks <3

(04-04-2013, 08:34 PM)Ben Wrote: Interesting project, look forward to seeing the golf arch trims on there. Are you doing the wrapping yourself?

The trims look quite good IMO, mocked them up today, they need a little trimming but will fit pretty well in the end I think.
This is what they look like fitted:

[Image: ailesgolf3sur3063.jpg]

(05-04-2013, 04:04 PM)4WayDiablo Wrote: Also back on topic that grey is really nice grant! You didn't spray that did you?

Cheers Phil Smile its wrapped in vinyl. BMW frozen grey. I think the grey will go nicely with that black bucket seat you want to sell me Wink haha


More progress today:

Wrapping the doors. Split it under the bump strip to make life easer
[Image: IMG_2161_zps1a8c5a82.jpg]

How its looking at the end of today
[Image: IMG_2165_zps6fcd9ef6.jpg]

[Image: IMG_2167_zps90a90e16.jpg]

Got some ph3 sills to go on. Fitted the black side repeater that looks a gazillion times better than the orange ph2 crud.

Hopefully going to do the passenger door and wing tomorrow, and roof if all goes well Smile
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#58
please loose the gay fake carbon bonnet....
[Image: DSC_5848Custom_zps75885397.jpg]
Reply
Thanks given by:
#59
Its keeping me engine dry at the moment...

We dont all have deep enough pockets for real carbon panels Wink

It will probably go grey with the rest of the car in the long run anyhow Smile
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#60
Looks like a really decent job you've managed there mate! Can't wait to see it finished up Big Grin
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 3 Guest(s)