Posts: 34
Threads: 7
Joined: Nov 2012
Thanks: 0
Given 0 thank(s) in 0 post(s)
Its on a 306 hdi and I used an elm 327 with pcmscan
I unplugged the egr and cleared the code for that which was also on there
thanks
cheers
Posts: 7,825
Threads: 465
Joined: Dec 2011
Reputation:
114
Location: Cullompton Devon
Car Model/Spec: Vauxhall
Thanks: 1
Given 98 thank(s) in 92 post(s)
p00c8 = P00200 = Injector Circuit Malfunction
p00cc = P00204 = Injector Circuit Malfunction - Cylinder 4 S2000PM1/2 - Injector control # 4. Open circuit or short to earth.
P02XX = Fuel and Air Metering
if you get letters in the obd codes it normaly needs converting to Decimal as its in Hexadecimal
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Thanks: 13
Given 106 thank(s) in 106 post(s)
That seems a pretty specific code, so i'm thinking wiring problems on injector 4 lol. It's not a problem i've seen before, but have a look about for burnt contacts, corrosion and broken wires, could even just be a bad earth.