Clearout. brakes, air filter setup, amp,and more

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Clearout. brakes, air filter setup, amp,and more
#1
Well had a rummage for things I don't need anymore
Any prices are excluding postage but much prefer collection at ace cafe, or Xmas meet (reading) or anywhere in route

First up are the 266mm Lucas brake calipers and sliders does not include pads, £20
Finished in red could do with a TouchUp
   

Air filter & setup from an 1.9 DTurbo Xud. It re-routes it to behind the passenger headlight. Easy to get a cold feed to and so on, The filter it comes with needs a good clean fits in the bay as the picture is orientated £20
   

Next up is driver and passenger side vents and 2 gear gaitors £3 each
   

A ph3 twin optics stalk £10
And other stalk (wipers) £3
   

Dash dimmer and light level switches £5 for the whole thing(or a pint at ace £4)
   

A/C heater control panels
£5
£4(for the one with slight nick on a button)
   

Sony xplod amp for 6x9's 250w
   

Brand new never fitted wishbone with all but the ball joint £5
Was bought for my DTurbo iirc
Used wishbone with slight surface rust ... free
   

Armrest £5
High level brake light £2
And manual mirror covers £2

Also pics and offers available for :

Black dash dials surround (speedo/rev dials)
Plastic air intake that fits by the grill and goes over slam panel
Ph3 single headlight adjuster unit
Seatbelt pre-tensioner
And a DTurbo driver seat (cloth with red dashes ) free


Attached Files Thumbnail(s)
   
Reply
Thanks given by:
#2
Ain't got any ph1 interior door handle surrounds have ya?
[Image: SDC10442-1.jpg]
Reply
Thanks given by:
#3
You can that sub to the list Phil, I need to spend money on other ninja Big Grin

Oh yeah Jonny, meant to say, I coulnt find mine, ill keep looking tho, got stacks of shit kicking around
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Reply
Thanks given by:
#4
OK samass. I'll pop some money your way at ace
And Jonny, will any of these do?
I have no idea if they were removed from my ph1 or 3 or whatever lol
   
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#5
Bring em to ace please rev and ill see if they fit
[Image: SDC10442-1.jpg]
Reply
Thanks given by:
#6
have you got drivers handle surrounds?

And i'll have armrest, drivers side vent for deffo but you ain't put a price on amp?
Don't worry about what I'm doing, I want you to worry about what you're doing
Reply
Thanks given by:
#7
What sort of air filter is that? Universal jobbie?
[Image: P1060836_zpsz3xgxt7q.jpg]
Reply
Thanks given by:
#8
Kwik if no one else can sort you out with the drivers door handle surround pm me your addy and I'll bung one in a Jiffy bag for you tomorrow - just make a small donation to club funds.
Reply
Thanks given by:
#9
(12-11-2012, 07:25 PM)Kwik Wrote: have you got drivers handle surrounds?

And i'll have armrest, drivers side vent for deffo but you ain't put a price on amp?
OK cool. So I shall see you at ace then :-)
As for the amp. Make me an offer :-)
And Jonny has first refusals on the door surrounds but if he doesn't want them then I'll come see you again
(12-11-2012, 07:47 PM)WiNgNuTz Wrote: What sort of air filter is that? Universal jobbie?

It is made by apiro
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#10
i don't do offers lol. lets just say i grew up on brockley and everything was cheap and hot ninja so you tell me a price and if it's fair i'll have it
Don't worry about what I'm doing, I want you to worry about what you're doing
Reply
Thanks given by:
#11
Designed for the dt? How does a tenner plus some food/drink at ace grab ya?
[Image: P1060836_zpsz3xgxt7q.jpg]
Reply
Thanks given by:
#12
so ill bring the armrest, drivers side vent, amp and air filter to ace
along with some door handle surrounds to test
does anyone else want anything else?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#13
If have the wishbone but your miles away!
[Image: A1A3B2B1-9269-463A-9F21-2ABF4CE9BEAC-165...A3B3F7.jpg]
Reply
Thanks given by:
#14
i could enquire postage? or xmas meet?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#15
Doubt ill make the Xmas meet tbh, what you reckon it'll cost to post?
[Image: A1A3B2B1-9269-463A-9F21-2ABF4CE9BEAC-165...A3B3F7.jpg]
Reply
Thanks given by:
#16
(15-11-2012, 09:01 PM)Oil-burner Wrote: Doubt ill make the Xmas meet tbh, what you reckon it'll cost to post?


if i get it to a myhermes shop they rekon £4
yodel 48 want £7
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#17
Give it a week or so, if you haven't sold it ill have it!
[Image: A1A3B2B1-9269-463A-9F21-2ABF4CE9BEAC-165...A3B3F7.jpg]
Reply
Thanks given by:
#18
ill take the wishbone, its drivers side right? cos ive stripped the threads out of the small alighment bolt on the pbush and now it seams to move about alot :S
[Image: sig-1.jpg]

106 Xud9 Conversion GtiD (2nd Engine Rebuild)
SOLD

Dan! Wrote:Want me to blow this one up for you aswel?
Reply
Thanks given by:
#19
I believe so, and I guess you'll want it posted?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#20
(17-11-2012, 03:29 PM)4WayDiablo Wrote: I believe so, and I guess you'll want it posted?

If I could
[Image: sig-1.jpg]

106 Xud9 Conversion GtiD (2nd Engine Rebuild)
SOLD

Dan! Wrote:Want me to blow this one up for you aswel?
Reply
Thanks given by:
#21
I'll see if I can do the myhermes one for £4 if that's alright with you? £19 posted I'll pm you my PayPal
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#22
(17-11-2012, 06:23 PM)4WayDiablo Wrote: I'll see if I can do the myhermes one for £4 if that's alright with you? £19 posted I'll pm you my PayPal

So £5 wish bone. £4 postage and £10 packaging? Or have I messed that up Confused
[Image: sig-1.jpg]

106 Xud9 Conversion GtiD (2nd Engine Rebuild)
SOLD

Dan! Wrote:Want me to blow this one up for you aswel?
Reply
Thanks given by:
#23
I've messed that up haha call it a tenner posted? Fees covered
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#24
(18-11-2012, 05:41 PM)4WayDiablo Wrote: I've messed that up haha call it a tenner posted? Fees covered

Ok what's you papal?
[Image: sig-1.jpg]

106 Xud9 Conversion GtiD (2nd Engine Rebuild)
SOLD

Dan! Wrote:Want me to blow this one up for you aswel?
Reply
Thanks given by:
#25
Ill take the wishbones off you Big Grin price for postage? cheers
[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  SOLD Gti6 Brakes - Full Setup RetroPug 0 914 21-05-2018, 02:50 PM
Last Post: RetroPug
  Clearout; XSi, HDi, XUD parts, brakes and exhausts.. Jonny81191 8 2,218 28-01-2015, 10:00 AM
Last Post: Jonny81191
  306 d turbo bosch pump setup, fmic setup, wind deflectors, flocked interior bits Jamieh2013 1 1,588 18-01-2015, 08:36 PM
Last Post: Jamieh2013

Forum Jump:


Users browsing this thread: 1 Guest(s)