13-12-2011, 09:17 PM
Oops to resserrect an old thread, but felt the need to inform people upon a discover today!
Finally pulled the motor and stripped it down today to re aqquire the rods clutch etc out of it...
Puled it apart, to find a handfull of bits of ally in the oil filter pickup (not good...) after picking up a few bits, instantly know what it is, and focus my eyes to the piston oil squirters, to find one missing....
All I can say, is that fook that head let go, because if it didnt, there would have been $$$ of conrods out the front of the crankcase in a very limited ammount of miles, but luckily saved to just needing a possible little end bush due to extra wear without enough oil.... Certainly an intresting find, and slightly concerning!
Thought we had enough clearance, but obviously not enough!
Finally pulled the motor and stripped it down today to re aqquire the rods clutch etc out of it...
Puled it apart, to find a handfull of bits of ally in the oil filter pickup (not good...) after picking up a few bits, instantly know what it is, and focus my eyes to the piston oil squirters, to find one missing....
All I can say, is that fook that head let go, because if it didnt, there would have been $$$ of conrods out the front of the crankcase in a very limited ammount of miles, but luckily saved to just needing a possible little end bush due to extra wear without enough oil.... Certainly an intresting find, and slightly concerning!
Thought we had enough clearance, but obviously not enough!
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
| #DervMafia |