Ozonehostiles Blurple gti6.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ozonehostiles Blurple gti6.
#91
(01-05-2014, 01:38 PM)Tom Wrote: Shit the forums down, Zakk must be updating ALL of his project threads again Undecided

lmao

I don't have that many Itwasntme
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
#92
(01-05-2014, 12:55 PM)ozonehostile Wrote:
(01-05-2014, 12:47 PM)RetroPug Wrote: The standard backbox weighs an absolute tonne!

Looking good, nice shineys! Big Grin

I think the one I took off probably weighs more than your average one anyway because of the amount of welding done on it haha.

Looking through old mot's, blowing exhaust had been an advisory for the last 3 years haha.

The entire exhaust and box was basically made out of patches and pigeon shit welding haha

(30-04-2014, 11:53 PM)7057sam Wrote: Yeah I love the magnex sound on a 106/rallye/saxo but magnex use a 2.5 bore on the 6 so get max power but max boom with less raspy hence why the 106's ones are so rasy because the bore is like 2 inch???

Yesh with mine It was lack low down torque but for what I use it for its certainly the best system..

I put it next to the 2" supersprint off my rallye and it makes it look like a peashooter in comparison haha

I'll just have to drive it enthusiastically everywhere to keep it sounding good then haha

Matt is decatting his rallye soon so I'll have a go in that (with matts kind permission :-P) to pass judgement on whether the cat stays or not.
Dum-Dum, if you read this, I think your rallye has the same exhaust as this? The ear bleedingly loud one?

Like you need too ask Tongue (break it you buy it)
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#93
(01-05-2014, 03:18 PM)Matt-Rallye Wrote:
(01-05-2014, 12:55 PM)ozonehostile Wrote:
(01-05-2014, 12:47 PM)RetroPug Wrote: The standard backbox weighs an absolute tonne!

Looking good, nice shineys! Big Grin

I think the one I took off probably weighs more than your average one anyway because of the amount of welding done on it haha.

Looking through old mot's, blowing exhaust had been an advisory for the last 3 years haha.

The entire exhaust and box was basically made out of patches and pigeon shit welding haha

(30-04-2014, 11:53 PM)7057sam Wrote: Yeah I love the magnex sound on a 106/rallye/saxo but magnex use a 2.5 bore on the 6 so get max power but max boom with less raspy hence why the 106's ones are so rasy because the bore is like 2 inch???

Yesh with mine It was lack low down torque but for what I use it for its certainly the best system..

I put it next to the 2" supersprint off my rallye and it makes it look like a peashooter in comparison haha

I'll just have to drive it enthusiastically everywhere to keep it sounding good then haha

Matt is decatting his rallye soon so I'll have a go in that (with matts kind permission :-P) to pass judgement on whether the cat stays or not.
Dum-Dum, if you read this, I think your rallye has the same exhaust as this? The ear bleedingly loud one?

Like you need too ask Tongue (break it you buy it)

Lmao, standard policy for the Herefordshire crew
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
#94
(30-04-2014, 07:12 AM)Piggy Wrote: You're as bad as me for buying more parts before the other parts are fitted
And me, I've got at least a grands worth of parts knocking about waiting to be fitted between the 2 cars far less bike and board parts too.



(01-05-2014, 12:55 PM)ozonehostile Wrote:
(30-04-2014, 11:53 PM)7057sam Wrote: Yeah I love the magnex sound on a 106/rallye/saxo but magnex use a 2.5 bore on the 6 so get max power but max boom with less raspy hence why the 106's ones are so rasy because the bore is like 2 inch???

Yesh with mine It was lack low down torque but for what I use it for its certainly the best system..

Dum-Dum, if you read this, I think your rallye has the same exhaust as this? The ear bleedingly loud one?

Yeah, I know the back box is the same but I cant believe mine has a mid box as its that loud, my ears were ringing even with decent ear plugs and like ringing for hours afterwards too. Its alright anywhere but the motorway or stops being boomy past about 90 or below 50
Reply
Thanks given by:
#95
(01-05-2014, 08:07 PM)Dum-Dum Wrote:
(30-04-2014, 07:12 AM)Piggy Wrote: You're as bad as me for buying more parts before the other parts are fitted
And me, I've got at least a grands worth of parts knocking about waiting to be fitted between the 2 cars far less bike and board parts too.

I know that feeling, I got so much stuff waiting to be fitted
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#96
[Image: 20140501_192318_RichtoneHDR_zpsupyy8vvd.jpg]

Looks right at home
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
#97
Blackmasks and new badges sorted too, should be looking good by fcs :-D
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
#98
That exhaust is sitting pretty on there now!

Is all the suspension etc sorted now? Smile
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
#99
(02-05-2014, 02:12 PM)Matt-Rallye Wrote: That exhaust is sitting pretty on there now!

Is all the suspension etc sorted now? Smile

Just waiting for my new shocks and springs to arrive :-)
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Cool beans Smile i received confirmation my decat was delivered today.. bring on the bwarps!! Big Grin
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
My sister just text me my suspension stuff also has arrived :-D

Guess what I'm doing tomorrow haha
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Spur of the moment purchase [Image: 20140503_105035_zpstrmbow26.jpg]
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
What make are they?
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
They're gmax dude.

I'm a big fan of their stuff

Productive day today :-)

Sold a load of stuff this morning then spent an afternoon fitting my new suspension

Gmax shocks and 60mm springs, new topmounts and bearings plus painted the spring cups to tidy the install up [Image: 20140503_191832_zpsgvtv9ysd.jpg]

All done and looking good, also changed the Wishbones, balljoints and Droplinks while I was there [Image: 20140503_193511_zpseeyaqhsn.jpg]
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Productive day, took all the suspension off again to cut some more off the bumpstops then reassembled cleaning as I went.

All the running gear is now brand new and I'm keen as anything to see now it goes :-D

[Image: 20140504_172012_RichtoneHDR_zpsfrd4yiui.jpg]
Then started to clean the engine bay I'll get my rallye aux setup fitted soon then attack it again with the steam cleaner
[Image: 20140504_175355_RichtoneHDR_zps4iwuxs41.jpg]
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
looking good mate will be like new now Smile bit it is about time the dt got this much love Wink
Reply
Thanks given by:
Looking good...
That manifold needs the autosol/piggy OCD treatment!!
Wishes for more power...
Reply
Thanks given by:
(04-05-2014, 06:47 PM)Piggy Wrote: Looking good...
That manifold needs the autosol/piggy OCD treatment!!

All the exposed engine parts are coming off to be powder coated/polished anyway, I've just scrubbed the last 15 years of dust and grease buildup off :-)

Just for the lols

Old vs new [Image: 20140504_140209_zpsinzbvxci.jpg]
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
What did you use to clean engine? Are you ok to jetwash these engines?
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
Gmaxx you tight bastard lol

did my escort on gmaxx pretty shure it was the fact it was a escort which made it handle worst Dodgy

I be doing my manifold with autosol gave up after a few hours and decided to take it off andnspray it Smile
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
(04-05-2014, 10:24 PM)kentiiboii Wrote: What did you use to clean engine? Are you ok to jetwash these engines?

Stuff called wurth 2040, like wd40 but waaaay better. Literally use it for everything haha
As for jetwashing, I cover the most sensitive parts like battery, ecu and whatever else you don't want water getting in with plastic and tape then focus your attention on the block and head

(04-05-2014, 11:26 PM)7057sam Wrote: Gmaxx you tight bastard lol

did my escort on gmaxx pretty shure it was the fact it was a escort which made it handle worst Dodgy

I be doing my manifold with autosol gave up after a few hours and decided to take it off andnspray it Smile

I do quite like gmax aha it's good for a road car.

I'll be saving for bilstein in the meantime but I just wanted something half decent on there for show season.

I'm moving out of the mothers house soon so can't splurge silly money on shinies like bilstein lol :-(
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Just fabricate a small Shack in the corner of your unit tbh, simples.
Night Blue VW Golf 7 GTD : Bianca 306 Rallye : Mini Cooper D (The Mrs')
[Image: wallye-gtd.JPG?raw=1]
HDi Owner for 200k/9 years
Reply
Thanks given by:
Service day today:

Dropped the gear oil out, definitely not been change in a while aha [Image: 20140505_124637_zpsvrlpxxmc.jpg]

Engine oil next, was so diluted it was basically more petrol than oil [Image: 20140505_130544_zpsapaqoptb.jpg]

Both fluids filled up with Peugeot recommended total oil

Next up sparkplugs and cleaned the coilpacks, good call on my behalf as the plugs in there were wrong,now replaced with pug recommend ngk


Drained the brake fluid, refilled and bled with new fluid

Cleaned out the throttle body and icv

Removed rusty old airbox, ready for replacement now



Next job for tomorrow is fix the blowing exhaust between the cat and midbox, flush the coolant and refill and fit my ph1 seats :-)
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Nice, pug oils and NGK plugs will make a good difference!
Bet that gearbox oil stank a bit....
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
Reply
Thanks given by:
(05-05-2014, 06:38 PM)RetroPug Wrote: Nice, pug oils and NGK plugs will make a good difference!
Bet that gearbox oil stank a bit....

yeah lol, putting the right plugs in is probably the biggest single improvement ive made aha

old gear oil smells like onion rings to me, anyone else? haha


cant wait to fit my bbm gear linkages, should be a winning combo with fresh oil Big Grin
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
Ive gone for all orignal service parts on mine including recommended oil, gear oil and spark plugs. Mine was a huge difference over my dads. Just need to do gear oil and fuel filter tomorrow.
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
(05-05-2014, 09:07 PM)kentiiboii Wrote: Ive gone for all orignal service parts on mine including recommended oil, gear oil and spark plugs. Mine was a huge difference over my dads. Just need to do gear oil and fuel filter tomorrow.

only the best for the '6 haha

i knew mine would have the wrong sparkplugs, there's no way normal people would pay extra for the recommended ones when you can get some ngk that fit for about £8 haha
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
I only paid £8 for the recommended ngk ones anyway.
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
What are the actual Peugeot-recommended plugs? I think they often came with champion ones from the factory iirc, however the correct NGK plugs (BKR6EK) are cheap and good. No need for 25 pound super irridium kryptonite thermonuclear race plugs or whatever the cool kids are buying these days.

Kentiiboii the pug gearbox oil makes a really good difference, or did for me anyway.
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
Reply
Thanks given by:
They're the ngks that I have.

Yeah ive had the gear oil there for a while, just been busy with other stuff for it.
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 4 Guest(s)