Posts: 25
Threads: 6
Joined: Dec 2013
Car Model/Spec: Peugeot 306 2.0 HDI
Thanks: 0
Given 0 thank(s) in 0 post(s)
Hi guys.
Been replacing the brake servo this week so that meant I had to take out the entire dashboard fascia to get behind the steering column and the steering mount. Put everything back and now the car won't start. The car turns over and the starter motor still goes but it won't fire up and start. I'm at my wits end with this piece of shit I've had it for nearly 2 months and it's spent 1 of those off the road.
Posts: 18,242
Threads: 386
Joined: Dec 2011
Reputation:
87
Location: Suffolk
Car Model/Spec: Focus Titanium
Thanks: 1
Given 118 thank(s) in 117 post(s)
22-02-2014, 03:20 PM
(This post was last modified: 22-02-2014, 03:21 PM by Toms306.)
Sounds like typical HDi ownership tbh...
My guess is one of the plugs has dropped out or wasn't put back. Either for fuel pump or BSi probably.
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
Thanks: 2
Given 74 thank(s) in 70 post(s)
have you knocked the immobiliser receiver thing off the ignition barrel?
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 25
Threads: 6
Joined: Dec 2013
Car Model/Spec: Peugeot 306 2.0 HDI
Thanks: 0
Given 0 thank(s) in 0 post(s)
Cheers guys, sorted it now! We'd knocked the inertia switch when we let the car down off the trolley jack! Also hadn't put the earth lead back on properly, doh!
Posts: 1,663
Threads: 62
Joined: Jul 2012
Reputation:
10
Location: Rugby, Warwickshire
Car Model/Spec: Golf 7 GTD : LBSC Rallye
Thanks: 0
Given 11 thank(s) in 11 post(s)
Was going to say inertia switch. It seems to react to when you remove it as I found the same on my brothers hdi.
Night Blue VW Golf 7 GTD : Bianca 306 Rallye : Mini Cooper D (The Mrs')
![[Image: wallye-gtd.JPG?raw=1]](https://www.dropbox.com/s/pcxk1pgpaucznvr/wallye-gtd.JPG?raw=1)
HDi Owner for 200k/9 years
