09-06-2014, 08:40 PM
Sorry some of this is a week or so out of date now.
After my recent rad swap as the car was behaving and keeping it's water I decided to throw in a bottle of water wetter to help her stay cool especially with FCS coming up and I've gotta say it works compared to coolant alone. Its running a couple of degrees cooler and if it does get hot it cools down faster so its recommended.
[attachment=16722]
Swapped both wishbones again in anticipation of FCS track time as I thought my P bushes were shot and I've gotta say they were by no means bad compared to some peoples on here but with Partner 800 p-bushes. Easy job with a hammer and a grinder. got them on with the bigger bolts and new pinch bolts and they are a brilliant drive, absolutely sure footed all the time and a very very worthwhile upgrade.
[attachment=16723]
[attachment=16724]
[attachment=16725]
[attachment=16726]
Next up was my 10mm fuel lines, found some reinforced clear line on ebay that said it was suitable for oil so got some so I could spot air bubbles.
[attachment=16727]
you can see the difference in flow in the banjos
[attachment=16728]
And a pair of before and after shots
[attachment=16729]
[attachment=16730]
After my recent rad swap as the car was behaving and keeping it's water I decided to throw in a bottle of water wetter to help her stay cool especially with FCS coming up and I've gotta say it works compared to coolant alone. Its running a couple of degrees cooler and if it does get hot it cools down faster so its recommended.
[attachment=16722]
Swapped both wishbones again in anticipation of FCS track time as I thought my P bushes were shot and I've gotta say they were by no means bad compared to some peoples on here but with Partner 800 p-bushes. Easy job with a hammer and a grinder. got them on with the bigger bolts and new pinch bolts and they are a brilliant drive, absolutely sure footed all the time and a very very worthwhile upgrade.
[attachment=16723]
[attachment=16724]
[attachment=16725]
[attachment=16726]
Next up was my 10mm fuel lines, found some reinforced clear line on ebay that said it was suitable for oil so got some so I could spot air bubbles.
[attachment=16727]
you can see the difference in flow in the banjos
[attachment=16728]
And a pair of before and after shots
[attachment=16729]
[attachment=16730]