28-02-2014, 03:16 PM
(23-02-2014, 12:55 PM)DeeTurbo Wrote: Chris, do you know how high the top of the arch is off the floor?
The front of mine is 580mm and the rear 560mm. I do get a bit of rubbing but I think that's because of the osf damper being rubbish.
Mine is 540mm front and 525mm rear, I think its usually a little more level than that but I'm parked backwards and downhill onto a kerb (don't have to worry about hand brake then)
The rear never scrapes, even with the full 2.2 lump in there, my 35kg jack and some wheels in the boot so she was on the stops it didn't scrape. Rear arches have been rolled and there's no liners in there.
The front only catches the lumps in the back of each front arch under full compression at some steering angles and the same with the front arch lip however the front arches have been rolled and then pulled by a few mm (you wouldn't notice if I hadn't told you). Again, no liners.
I am tempted to crack the torsion bars round another notch when I put the 21mm bars back in as I'm only on 20mm GTi6 bars currently but I think I'd need to cut the bump stops for suspension travel.
